Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Great news for all!

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

dredmoody(at)cox.net
Guest

Posted: Thu Apr 30, 2009 4:48 am Post subject: Great news for all!

Good news! My inspection went  quickly and smoothly today. The inspector was thorough but completely  reasonable. The Goose is loose! Flight testing will begin as soon as Wx and  circumstances permit.   

 Ed

AW_inspection_day_03.JPG

Description:

Filesize:

630 KB

Viewed:

8173 Time(s)

jaybannist(at)cs.com
Guest

Posted: Thu Apr 30, 2009 5:10 am Post subject: Great news for all!

Ed,

 

 That IS good news!  Congratulations !!

 

 Jay Bannister

 Do not archive

 

   

 

   

 

 --

psm(at)att.net
Guest

Posted: Thu Apr 30, 2009 5:17 am Post subject: Great news for all!

Congratulations, Ed.



Please don't fly directly over my head.  You know what gooses do with 

their food when they are done with it . . .



Paul

do not archive



At 05:46 AM 4/30/2009, you wrote:

 	  Quote: 	
		  The Goose is loose!

tigerrick(at)mindspring.c
Guest

Posted: Thu Apr 30, 2009 6:08 am Post subject: Great news for all!

Congrats, Ed!!



That's one beautiful airplane you got there. Try not to scratch in during Phase 1, OK?



Rick Lindstrom



--

JohnDRead(at)aol.com
Guest

Posted: Thu Apr 30, 2009 6:25 am Post subject: Great news for all!

Congratulations Dr. Ed.

  

 John  Read

CH701 - Elbert CO - Jabiru 3300



Phone: 303-648-3261

Fax:  303-648-3262

Cell: 719-494-4567   

  In a message dated 4/30/2009 6:53:20 A.M. Mountain Daylight Time,  dredmoody(at)cox.net writes:

  	  Quote: 	
		     Good news! My inspection went    quickly and smoothly today. The inspector was thorough but completely    reasonable. The Goose is loose! Flight testing will begin as soon as Wx and    circumstances permit.     

   Ed



	




Big savings on Dell XPS Laptops and Desktops!

  [quote][b]

tonyplane(at)bellsouth.ne
Guest

Posted: Thu Apr 30, 2009 6:26 am Post subject: Great news for all!

Great, Ed!

  

 You will enjoy flying the XL.

  

 Tony Graziano

 XL/Jab 487 hrs

  

 DO NOT ARCHIVE

 [quote]   ---

Terry Phillips

Joined: 11 Jan 2006
Posts: 346
Location: Corvallis, MT

Posted: Thu Apr 30, 2009 7:43 am Post subject: Great news for all!

Congratulations, Ed



 Beautiful airplane. Good luck with Phase I.



 Terry



 

 At 07:46 AM 4/30/2009 -0500, you wrote:

  	  Quote: 	
		  Good news! My inspection went quickly and smoothly today. The inspector was thorough but completely reasonable. The Goose is loose! Flight testing will begin as soon as Wx and circumstances permit. 

  

 Ed 	
 

 

 Terry Phillips  ZBAGer

 ttp44~at~rkymtn.net

 Corvallis MT

 601XL/Jab 3300 s .. l .. o .. o .. w build kit - Tail, flaps, & ailerons are done; waiting on the wings

 http://www.mykitlog.com/N47TP/      [quote][b]

_________________
Terry Phillips
Corvallis, MT
ttp44<at>rkymtn.net
Zenith 601XL/Jab 3300 slow build kit - Tail feathers done; working on the wings.

naumuk(at)windstream.net
Guest

Posted: Thu Apr 30, 2009 8:47 am Post subject: Great news for all!

Dred-

     Two thumbs up!

                                                                                          Bill

 [quote]   ---

lwinger

Joined: 21 Jun 2006
Posts: 229
Location: Tustin, CA

Posted: Thu Apr 30, 2009 9:04 am Post subject: Great news for all!

A new chapter begins!  Congratulations.

  

 Larry Winger

 650/Corvair

 Fuselage riveted

  [quote][b]

_________________
Larry Winger
Tustin, CA
Plans building 601XL/650 with Corvair
Installing fuel system
www.mykitlog.com/lwinger

lwhitlow

Joined: 15 Jan 2006
Posts: 76
Location: Valparaiso Indiana

Posted: Thu Apr 30, 2009 5:44 pm Post subject: Re: Great news for all!

Congratulations Ed  That's looks like a BEAUTIFUL JOB!!!!!



Fair Skies for your First Flight!!!



Larry Whitlow

Ron Lendon

Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI

Posted: Thu Apr 30, 2009 6:25 pm Post subject: Re: Great news for all!

That's the kind of news I needed to hear to get me back to building. Congratulations Ed.

_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/

dredmoody(at)cox.net
Guest

Posted: Fri May 01, 2009 3:50 am Post subject: Great news for all!

That's the kind of  feedback I needed to hear. Pretty nice the way that works out, huh? Thanks Ron  and thanks to all who responded with encouragement and support for me and my  dad. I'm not the guy who will tell you that building was more fun that finishing  the airplane. Building was an adventure and an educational process, but like all  of my education, it has been a means to an end rather than a goal in itself.  That is not meant to disparage the building experience... it is simply  meant as an insight to my motivation. The plane was always envisioned as a  vehicle and like my car or truck I have more than a little bit of silly emotion  invested in it. But at the bottom line it is still a vehicle... a complex  machine, a tool meant for a purpose. That purpose is to get me and my dad some  enjoyable mobility and time in the air together. That doesn't exclude my wife or  the rest of my family, but realistically it means a whole lot more to me and  to Papa than to anyone else. They just tolerate us because they love us  (God help them). We look forward to the flying part of this adventure fully  aware of the resposibility to maitain the machine and use it responsibly. We  will try not to let you all down.

  

      On the subject of  responsibility, I will now also attempt to be more responsive to the questions  of other builders now that I can move my drawings back here to the house where I  can reference them more easily. By doing that I can hopefully pay back some of  the help I have been given along the way. 

  

 Thanks again,

  

 Ed

   [quote][b]

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Fri May 01, 2009 2:26 pm Post subject: Re: Great news for all!

Well I say good things happen to good people....



[quote="dredmoody(at)cox.net"]That's the kind of  feedback I needed to hear. Pretty nice the way that works out, huh? Thanks Ron  and thanks to all who responded with encouragement and support for me and my  dad. I'm not the guy who will tell you that building was more fun that finishing  the airplane. Building was an adventure and an educational process, but like all  of my education, it has been a means to an end rather than a goal in itself.  That is not meant to disparage the building experience... it is simply  meant as an insight to my motivation. The plane was always envisioned as a  vehicle and like my car or truck I have more than a little bit of silly emotion  invested in it. But at the bottom line it is still a vehicle... a complex  machine, a tool meant for a purpose. That purpose is to get me and my dad some  enjoyable mobility and time in the air together. That doesn't exclude my wife or  the rest of my family, but realistically it means a whole lot more to me and  to Papa than to anyone else. They just tolerate us because they love us  (God help them). We look forward to the flying part of this adventure fully  aware of the resposibility to maitain the machine and use it responsibly. We  will try not to let you all down.

  

      On the subject of  responsibility, I will now also attempt to be more responsive to the questions  of other builders now that I can move my drawings back here to the house where I  can reference them more easily. By doing that I can hopefully pay back some of  the help I have been given along the way. 

  

 Thanks again,

  

 Ed

    	  Quote: 	
		  [b]

_________________
Tommy Walker
N25A - Anniston, AL

TxDave

Joined: 22 Jul 2006
Posts: 168
Location: Temple, TX

Posted: Fri May 01, 2009 8:29 pm Post subject: Re: Great news for all!

The Goose looks fantastic, Ed. Congratulations for a job well done. 



Yes, I'm still here.



Dave Clay

Temple, TX

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum