Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Adjusting the tailplanes

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
bdanbish(at)gmail.com
Guest





PostPosted: Sun Sep 21, 2008 9:59 pm    Post subject: Adjusting the tailplanes Reply with quote

Hi all,

I've been double checking my tailplanes prior to putting the top on and found some discrepencies from my orginal measure measurements of 5 deg. down and 13 deg up. I assume this is from the upgrade to mod 70. Sure thought I had it adjusted, but glad I checked.

So, instead of the above, I have 5.7 deg down and 11.2 deg up. Maybe someone out there can save me some head scratching and a whole lot of hassle fiddling with bolts in and out numerous times to get this set right, so here are my questions:

1) The TP18 has a rod end on it (TP18C). I seem to remember this is what I'll use to make adjustments. Will screwing that out (more threads showing) give me more degress of upward travel as I need? Or should it be screwed in more?

2) Does the Main pitch push rod need to be adjusted also?

I know this may seem like a simple thing to figure out but I know someone's bound to have made a lot of these adjustments and has a simple way to get the right results.

As always, your help is much appreciated. Very Happy

Dan
Visit - www.EuropaOwners.org


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
ptag.dev(at)tiscali.co.uk
Guest





PostPosted: Sun Sep 21, 2008 11:54 pm    Post subject: Adjusting the tailplanes Reply with quote

Hi! Dan
Can't help with the adjusters but I recall 8 years ago finding out that
Andy Draper wanted 1 deg more than the 12 deg in the manual and wouldn't
do the first flight test until I got it to 13 deg. actually by grinding
away the balance weight "up stop". I think the adjusters mostly only
change the range of operation to the control stick (may be wrong here)
but I think the limiting factor is always the bump stop of the balance
weights at the top and bottom.
Regards
Bob Harrison G-PTAG

--


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
bdanbish(at)gmail.com
Guest





PostPosted: Mon Sep 22, 2008 4:09 pm    Post subject: Adjusting the tailplanes Reply with quote

Ah, that makes sense. Except if too much weight is taken off to get them in balance? Thanks for the help.
Dan
Visit - www.EuropaOwners.org


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
bdanbish(at)gmail.com
Guest





PostPosted: Mon Sep 22, 2008 11:55 pm    Post subject: Adjusting the tailplanes Reply with quote

I was able to figure it out tonight, it wasn't as much trouble as I thought it was going to be.

After removing the weights and cables from the TP18 rod and disconnecting it so I could adjust it, unscrewing it has the effect of increasing the up direction without affecting the down position much. I was able to get both to 13.3 deg up and 5.0 deg down. The .3 will come out when I add a bit of cushion to the top of the mass balance tower.

I measured from the middle of the tailplane, at the outside point of the trim tab. I assume this isn't critical.

I feel like I got it nail this time. Thanks for the input.

Dan
Visit - www.EuropaOwners.org


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
ptag.dev(at)tiscali.co.uk
Guest





PostPosted: Tue Sep 23, 2008 12:35 am    Post subject: Adjusting the tailplanes Reply with quote

Hi! Dan
I don't know who you were replying to? But if it was a response to my
message I didn't intend you to remove any material from the balance
weights but to thin the bump stops.
Regards
Bob Harrison G-PTAG

--


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
bdanbish(at)gmail.com
Guest





PostPosted: Tue Sep 23, 2008 10:24 am    Post subject: Adjusting the tailplanes Reply with quote

Just confirming that I got things set right. Thanks for the input.

Dan
Visit - www.EuropaOwners.org


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group