speckter(at)comcast.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Fri Apr 11, 2008 12:22 pm    Post subject: Fuel Filter clogging | 
				     | 
			 
			
				
  | 
			 
			
				Now that I am flying, I like everyone else flying, am concerned with a clogged filter.  It is a big job to get down in the tunnel and disassemble the filter only to find that it is OK.  Since filters clog progressively and not all at once, I measured the fuel flow by taking the fuel line off of the injector servo and connecting it to a hose that I drop the other end into the gas tank.  I then turn on the boost pump and read the fuel flow.  Mine started out at 42 gph and has not changed since I started flying.  This gives me peace of mind without all the disassembly.  If the flow drops below 40 gph I can then go and clean it.  Though I would pass along this time saving tip.  
    
 Gary  
 40274  
 Flying  
        [quote][b]
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  | 
			 
		  |