Matronics Email Lists :: View topic - AD compliance documentation questions

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

AD compliance documentation questions

Matronics Email Lists Forum Index -> RV6-List

View previous topic :: View next topic

Author Message

recapen(at)earthlink.net
Guest

Posted: Mon May 15, 2006 6:12 am Post subject: AD compliance documentation questions

Folks,



I just added the hard-line for my prop governor.  There is also a Lycoming SB leading to an AD for this line.



After I comply with the requirements, how do I document the compliance?  I'm guessing that it should go in my engine Log-Book.



Here are the questions:  Am I authorized to make the entry?  I am the builder - but I don't have my ltd A&P for the airframe as it isn't flying yet.  Is there a specific text for the compliance?



Thanks,

Ralph Capen

RV6AQB N822AR (at) N06 Firewall Foreward



Building an experimental is supposed to be a learning experience - that's an understatement!

- The Matronics RV6-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV6-List

fbaldwin(at)nothnbut.net
Guest

Posted: Mon May 15, 2006 6:21 pm Post subject: AD compliance documentation questions

Ralph,  After recording the "date" and "total time" if any, write:  1. WHAT

you did  2. WHERE you did it 3. HOW you did it.



You might look at some logbooks or talk to your A&P for some more tips.  As

a DAR I am usually disappointed with the lack of logbook entries.  If you

install something write it up and sign it off with "signature" and title

"builder".  After its built you may get a repairman's certificate with a

number for the title.



Hope this helps.  Frank



 	  Quote: 	
		   Folks,



 I just added the hard-line for my prop governor.  There is also a Lycoming

SB leading to an AD for this line.
	


 	  Quote: 	
		  

 After I comply with the requirements, how do I document the compliance?

I'm guessing that it should go in my engine Log-Book.
	


 	  Quote: 	
		  

 Here are the questions:  Am I authorized to make the entry?  I am the

builder - but I don't have my ltd A&P for the airframe as it isn't flying
	


yet.  Is there a specific text for the compliance?

 	  Quote: 	
		  

 Thanks,

 Ralph Capen

 RV6AQB N822AR (at) N06 Firewall Foreward



 Building an experimental is supposed to be a learning experience - that's

an understatement!
	


 	  Quote:

- The Matronics RV6-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV6-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV6-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum