Matronics Email Lists :: View topic - Help needed re:- flap position indicator wires and an "inter

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Help needed re:- flap position indicator wires and an "inter

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

ptag.dev(at)tiscali.co.uk
Guest

Posted: Sat May 23, 2009 9:45 pm Post subject: Help needed re:- flap position indicator wires and an "inter

Hi! all 

I have previously had a position indictor failure on my LED bars.

I think I recall that it was the orange wire which does the

potentiometer information transfer? Mine is frozen in the fully up

indication irrespective of where the flaps are.

Can any one confirm?



I have flight tested my new Mode S Garmin 328 Transponder and it works

..except neither Waddington nor Humberside ATC have the aircraft

registration recognition  to confirm that function is working OK !

It does have a radio interference problem in that there is an

interrogation blip to be heard in the radio head sets which wasn't there

on the Garmin 320 original set.

Has anyone any suggestions?  (Except that I just wasted £1750 !)



Regards

Bob H G-PTAG

PS A "bright spark" at Wickenby suggested I infringe at Conningsby where

the Typhoons are based to see if they pick up the registration

information !

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

craigb(at)onthenet.com.au
Guest

Posted: Sat May 23, 2009 10:08 pm Post subject: Help needed re:- flap position indicator wires and an "inter

May be a stupid question re your garmin mode s

but you did put your unique mode S id code into the transponder when you

installed it???



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

mikenjulie.parkin(at)btin
Guest

Posted: Sat May 23, 2009 10:42 pm Post subject: Help needed re:- flap position indicator wires and an "inter

Hello Bob,



See attached diagram.  I am not sure that there is much ATC capability for

Mode S interrogation outside the major centres - London, Manchester.



Regards,



Mike



Do not archive.



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

trim.pdf

Description:

Download

Filename:

trim.pdf

Filesize:

23.47 KB

Downloaded:

94 Time(s)

ptag.dev(at)tiscali.co.uk
Guest

Posted: Sun May 24, 2009 3:17 am Post subject: Help needed re:- flap position indicator wires and an "inter

Hi! Craig

Yes I think so but it uses numerical conversions for the alphabet as per

the old telephone system.

I was not able to check it out due to the inadequate ATC receiver

facilities in this patch !

Regards

Bob H G-PTAG

--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

mikenjulie.parkin(at)btin
Guest

Posted: Sun May 24, 2009 10:49 am Post subject: Help needed re:- flap position indicator wires and an "inter

Bob,



I am not sure whether you have configured your 328.



Details for set-up are on page 5-16/17 of the installation manual.



Numbers for G-PTAG are:



Binary: 0100_00_000_100_00_0011010100

Hex:  4040D4

Octal: 20040324



Regards,



Mike

Do not archive.



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum