 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
hgmckay
Joined: 23 May 2006
Posts: 397
|
 Posted: Mon Dec 29, 2008 7:05 am Post subject: Choke Cable Splitter for Rotax 912 UL |
 |
|
On my E-LSA Allegro 2000 with a Rotax 912 UL engine the choke for the two
carburetors uses a plastic tube type cable splitter that is permanently
mounted through the fire wall. I need to replace the cable that goes from
the splitter to the left carburetor. To do this I need to open the splitter
and pull the cable back through it to remove the cable. The Allegro assembly
manual showing this splitter shows only a photograph of the splitter and the
three cable connections on the splitter itself before it is inserted into
the plastic tube. It has been three years since I assembled this splitter
and I cannot remember if it can be disassembled or not. Since the tube and
its internal assembly are permanently mounted through the fire wall with
JBWeld, I cannot take the full assembly out. Is there anyone out there that
has recently built an E-LSA Allegro 2000 using this carburetor splitter that
remembers how it went together and how to disassemble it?
Hugh McKay
Allegro 2000
Rotax 912UL
| | - The Matronics Allegro-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Allegro-List |
|
|
|
| Back to top |
|
 |
hans.norring(at)vip.cyber
Guest
|
| Posted: Mon Dec 29, 2008 8:32 am Post subject: Choke Cable Splitter for Rotax 912 UL |
|
|
Hi Hugh
My experiance is that the splitter is a temp-installation, after a periode
of about 3 years the plastic attachment that move in the tube gets bigger,
and thereby get stuck, that will give a real funny engine sound when u go to
idle ( landing situation )it nearly get the engine to stop, all because of
having choker on, so get rid of this hopeless arrangement, we are 3 allegro
2000 here in denmark that had that problem, and it was not possible for us
to get it open, so my suggestion is to buy a similar 2 to 1 cabel
arrangement from aircraftspruce, its made by alu and a brass assambly, the
only bad thing is that the diameter is smaller than the original, so there u
need to be creative.
Hans Norring
OY-9259
Denmark
--
| | - The Matronics Allegro-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Allegro-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
