Speedy11(at)aol.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Fri Aug 08, 2008 5:53 pm    Post subject: Consensus On Finishing Back End Of Fiberglass Tips | 
				     | 
			 
			
				
  | 
			 
			
				Matt,
  I couldn't find your photos to view them.
  I'm assuming you plan to make the fin fiberglass piece removable for  replacement or repair of the antenna.  Doug's idea to add wood and glass  over it will work.  I used a piece of slightly curved aluminum hot glued to  the tip and laid the glass on the inside.  See http://www.rv-8a.net/2007.htm and  scroll down to 24 Feb 07.
  I made mine removable and added glass to cover most of the gap.  I'll  likely add a bit of RTV to keep water out.
  Stan Sutterfield
  www.rv-8a.net
   
   	  | Quote: | 	 		  Dear    Listers,
 
 Here are some pictures of my recently finished Fin and Rudder    
 fiberglass tips, specifically highlighting my notion of mounting the    
 VOR/GS/LOC antenna on the top of the Fin.  It came out very nice I    
 think and gives full access to cabling and antenna mount for    maintenance.
 
 But here's my question.  Look at that last picture of    the back end of 
 the Fin fiberglass tip and note the gaping hole.  I    gather from the 
 plans that it is kind of up to the builder whether to put    a cover on 
 the back of it.  My first question would have to be why    the f*** 
 isn't there one already molded on it like on the front of the    rudder 
 tip?  But, hostility aside, what's everyone's thoughts on    finishing 
 these?  I'm just thinking that my patience for fiberglass    layups 
 hovers around zero and I can just see taking a totally sweet tip    
 installation and mucking it royally.  But, I will if I must.  I    would 
 really like the back end finished off rather than gaping open like    
 that, but it might be something I could live    with...
 
 Thoughts?
 
 Matt Dralle
 RV-8    #82880
 
 ________________________________  Message 4     _____________________________________
 Time: 08:42:31 PM PST    US
 From: "Doug Ritter" <dougritter(at)frontiernet.net>
 Subject: Re:    Consensus On Finishing Back End Of Fiberglass Tips...
 Cut    a wood plug to size apx 1/4" thick, epoxy in place and cover with one    
 layer of glass cloth.  Sand and paint.
  | 	  
  
   
 
 Looking for a car that's sporty, fun and fits in your budget? Read reviews on AOL Autos.
   [quote][b]
 
  |  | - The Matronics RV8-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV8-List |  
  |  
 
 
 
 
  | 
			 
		  |