Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

AEC9004 Status?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
jskiba(at)icosa.net
Guest





PostPosted: Sun Dec 30, 2007 5:07 pm    Post subject: AEC9004 Status? Reply with quote

I guess this is more of a question for BOB but I figured the list might have
info on it also:
I was getting ready to do my Electrical system Final design after many
different version - ideas and after re-reading several articles and "the
book". I seem to need to know what the current status of the new AEC9004
Alternator controller.

My understanding is that this device will be able to control an internally
regulated Alternator on-off and also be able to handle the "possibility" of
"load dump" triggered by Crow bar Over volt protection in the current z24
diag.

Ref article:

http://www.aeroelectric.com/articles/Adapting_IR_Alternators_to_Aircraft.pdf
If it is not done, time frame?
Are there any changes to the doc to do until it is ready?
I have an internally regulated alternator, and am planning on getting an
SD-20 for emergency mode of main alternator failure.

Thanks in advance


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
jskiba(at)icosa.net
Guest





PostPosted: Mon Dec 31, 2007 7:34 am    Post subject: AEC9004 Status? Reply with quote

AS a follow up I did a little tweaking on z-14 to illustrate what I mean...
It's attached... please let me know what I am missing as far as adding the
Bridge diodes for both fuel pumps and ECU.

Aka I still have the below questions
Thanks and HAPPY NEW YEAR

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



Z14_fadec_Model_(1).pdf
 Description:

Download
 Filename:  Z14_fadec_Model_(1).pdf
 Filesize:  139.77 KB
 Downloaded:  207 Time(s)

Back to top
nuckolls.bob(at)cox.net
Guest





PostPosted: Mon Dec 31, 2007 10:56 am    Post subject: AEC9004 Status? Reply with quote

At 09:25 AM 12/31/2007 -0600, you wrote:

[quote]AS a follow up I did a little tweaking on z-14 to illustrate what I mean...
It's attached... please let me know what I am missing as far as adding the
Bridge diodes for both fuel pumps and ECU.

Aka I still have the below questions
Thanks and HAPPY NEW YEAR

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group