 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
tonyk(at)kaon.co.nz
Guest
|
 Posted: Tue Feb 14, 2006 1:41 pm Post subject: Fuel Gauge |
 |
|
For those with my fuel gauge I am in the latter stages of preparing
release 5 which will include...
1/ Separation of the initial full scale calibration and the set levels
routines.
2/ Use of a new display chip that requires minimal external components -
to the extent that I have a test display running inside a MAC/RAC servo
display box already.
3/ Support for using a standard capacitance gauge 0-5v analogue display
or input to Dynon EMS/FlightDEK still using the ten level calibration
routine integral to the system.
4/ Support for using a standard capacitance gauge 0-5v analogue display
or input to Dynon EMS/FlightDEK with uncalibrated levels for use with
external calibration routines. In this mode the fuel gauge exactly
emulates a capacitance sender without any tank incursion.
As soon as I have verfied the code changes I'll post the revised circuit
diagrams onto my web site.
Regards
Tony
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
bb(at)baliscate.freeserve
Guest
|
| Posted: Tue Feb 14, 2006 2:47 pm Post subject: Fuel Gauge |
|
|
Hi Tony
Have the gauge ready to plumb in to the existing fuel sight
gauge & hopefully calibrate but understand I need softwear to achieve this,
is this the procedure you are refering to. have lost touch with the guy who
built it for me, so have only the Europa sight gauge in the aircraft at the
moment.
Best wishes,
Charlie.
Gillian & Charlie
Baliscate House,
Tobermory ,Isle of Mull ,PA75 6QA
Tel 44(0)1688 302048
Fax 44(0)1688 302666
e-mail bb(at)baliscate.freeserve.co.uk
www.baliscate.com
---
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
tonyk(at)kaon.co.nz
Guest
|
| Posted: Tue Feb 14, 2006 3:49 pm Post subject: Fuel Gauge |
|
|
Charlie
Everything is built into the fuelgauge, you don't actually need any
special software on the PC.
You need to connect a PC to the gauge and run Hyperterminal to do the
calibration routing
Have a look at www.kaon.co.nz/europa/fuelgauvev3.pdf page 3 for basic
instructions.
Regards
Tony
------------------------------------------
Tony Krzyzewski Kaon Technologies Ltd
Managing Director PO Box 58521
Ph 09 274 1590 Greenmount
Fx 09 274 1593 Auckland
==========================================
Scanned by MXtreme - EAL4+ Mail Firewall
To view our latest newsletter visit
www.kaon.co.nz/newsletter/kaonnewsletter.htm
------------------------------------------
--
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
