Matronics Email Lists :: View topic - LoPresti Boom Beams for RV-10

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

LoPresti Boom Beams for RV-10

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Fri Apr 20, 2007 6:07 pm Post subject: LoPresti Boom Beams for RV-10

LoPresti has a HID wing tip modification for the RV-10.  Five minutes into Sun-N-Fun and I already made my first purchase.



The front corner of the wing tip gets cut out and a replacement fiberglass cut out and lense get put into place.  This makes room for the HID bulb.  The power of the RV-10 lamp is more powerful that there STCd versions.  And no cutting the wing leading edge.



Sun-N-Fun special, $760 with shipping for the pair.



Now I have wing tips to modify.



Any one want some never used, but previously installed Vans style halogen lights?



Larry Rosen

#356

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

johnh38(at)yahoo.com
Guest

Posted: Sat Apr 21, 2007 3:02 pm Post subject: LoPresti Boom Beams for RV-10

Larry,

  

 What is the part number for the LoPriesti HID for the RV-10.  I don't see a listing on their website. 

  

 http://www.speedmods.com/Boom_Beam/boom_beam_systems.htm

 http://www.speedmods.com/Boom_Beam/boom_beam_AML.htm

 



john

 40102

 ---

Jim & Julie Wade

Joined: 25 May 2006
Posts: 34

Posted: Tue Apr 24, 2007 4:10 am Post subject: Re: LoPresti Boom Beams for RV-10

Our plane was displayed at LoPresti. They installed the lights on Monday before S&F. There is no way to describe the difference they make.  You can run them full time with little power drain and 5000 hour bulb life. They will be offering them on the website soon. They did not want to advertize them until they had some installed. They are also looking at making a new cowl for the RV-10. These lites make a lot more since than to chop up theleading edge to install HID lights. The kit will come with everything to install the lights.

Blue Skies

Jim & Julie

rvbuilder(at)sausen.net
Guest

Posted: Tue Apr 24, 2007 5:24 am Post subject: LoPresti Boom Beams for RV-10

You have to love it when a company with the history and experience of LoPresti jumps into the RV-10 fray.  Any pictures of the install?  Don Wentz (Duckworks) makes an excellent product but alternatives are always a good thing.



Michael

Do not archive



--

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Tue Apr 24, 2007 5:50 am Post subject: LoPresti Boom Beams for RV-10

Earlier LoPresti was planning on providing a whole new wing tip incorporating HID lights.  When they evaluated the tip on the 10 they could only make a marginal improvement (maybe 1 knot), and they could not justify the price they would need to charge for the modified tip.  So to get there lights to work you cut out the lens area and insert there modified lens.



Jim & Julie, you have one beautiful airplane.



Mike, I can send you some photos this evening when I get home from work.



Larry Rosen

#356

 -------------- Original message ----------------------

From: "RV Builder (Michael Sausen)" <rvbuilder(at)sausen.net>

[quote] 

 <rvbuilder(at)sausen.net>

 

 You have to love it when a company with the history and experience of LoPresti 

 jumps into the RV-10 fray.  Any pictures of the install?  Don Wentz (Duckworks) 

 makes an excellent product but alternatives are always a good thing.

 

 Michael

 Do not archive

 

 --

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Tue Apr 24, 2007 6:10 am Post subject: LoPresti Boom Beams for RV-10

Eeeeek, FIBERGLASS work! 



That definitely is impressive that LoPresti is willing to dig into

the RV-10 market.  Would love to see them do even more items for

the 10.



As far as the lights go, while it's totally awesome to have another

option, I should point out that while it's mentally very stressful

thinking about cutting the leading edge of the wing, it's actually

a very simple process and has been kind of a "standard" for RV's

for a while....so it's not like the Duckworks thing is now a bad

option.  I think it's great that we finally have 2 really good

options. The mini round wingtip lights just were never destined

for greatness.  Now you have a choice....do you like to cut

aluminum and rivet, or do you like to cut fiberglass and sand?

Makes it great for choices!



Tim Olson - RV-10 N104CD - Flying

do not archive



larryrosen(at)comcast.net wrote:

 	  Quote: 	
		   

 

 Earlier LoPresti was planning on providing a whole new wing tip

 incorporating HID lights.  When they evaluated the tip on the 10 they

 could only make a marginal improvement (maybe 1 knot), and they could

 not justify the price they would need to charge for the modified tip.

 So to get there lights to work you cut out the lens area and insert

 there modified lens.

 

 Jim & Julie, you have one beautiful airplane.

 

 Mike, I can send you some photos this evening when I get home from

 work.

 

 Larry Rosen #356

GRANSCOTT(at)aol.com
Guest

Posted: Wed Apr 25, 2007 4:34 am Post subject: LoPresti Boom Beams for RV-10

In a message dated 4/24/2007 9:26:56 AM Eastern Daylight Time, rvbuilder(at)sausen.net writes:

  	  Quote: 	
		  experience of LoPresti jumps into the RV-10 fray.  	


 Certainly LoPresti makes some interesting quality speed mods...but at a cost that many RV builders may not want to invest in...unless they have lower margins for experimental aircraft?  Hopefully they will be competitive.

  

 P  



See what's free at AOL.com. 

  [quote][b]

ddddsp1(at)juno.com
Guest

Posted: Wed Apr 25, 2007 6:00 am Post subject: LoPresti Boom Beams for RV-10

Expect to be ridiculed for even suggesting RV10 builders should consider COSTS for these add-ons...............RV10 builders do not have a budget according to most.     

  

Dean 40449 

Too cold to paint!   [quote][b]

indigoonlatigo(at)msn.com
Guest

Posted: Wed Apr 25, 2007 6:41 am Post subject: LoPresti Boom Beams for RV-10

After spending an hour last night ripping out all the RG58 cable and re 

installing RG400, now I feel I need to ditch my duckwork lights and go with 

this option, I've decided sell my RV10 kit because I just can't keep up with 

the group. I think I'll wait until tomorrow morning to make my announcement 

official, California Super Lotto tonight, just maybe I can keep this thing 

afloat.



Do Not Archive



Disclaimer:



The above mentioned behavior is not true and nothing said can be taken as 

fact. Your mileage may vary. Contact your own mental health professional. No 

one but yourself got you into this situation.

 	  Quote: 	
		  From: "ddddsp1(at)juno.com" <ddddsp1(at)juno.com>

Reply-To: rv10-list(at)matronics.com

To: rv10-list(at)matronics.com

Subject: Re: Re: LoPresti Boom Beams for RV-10

Date: Wed, 25 Apr 2007 13:58:34 GMT



Expect to be ridiculed for even suggesting RV10 builders should consider 

COSTS for these add-ons...............RV10 builders do not have a budget 

according to most.



Dean 40449

Too cold to paint!

bhughes(at)qnsi.net
Guest

Posted: Wed Apr 25, 2007 7:27 am Post subject: LoPresti Boom Beams for RV-10

You just have to stop making improvements at some point and stick to

your earlier decisions. There will always be a better ???



Bobby

40116

(Just put may name on the GRT EFIS upgrade list yesterday)..ooops!  See

above.



 



--

robin1(at)mrmoisture.com
Guest

Posted: Wed Apr 25, 2007 10:43 am Post subject: LoPresti Boom Beams for RV-10

I have an unlimited budget & I keep exceeding it.  

LoPresti pricing has always seemed to be way out of line for the benefits. I just assumed that the STC process and small market size (plus profit & insurance) was the driving factor.  

   

Robin  

Do Not Archive  

         

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of ddddsp1(at)juno.com

 Sent: Wednesday, April 25, 2007 6:59 AM

 To: rv10-list(at)matronics.com

 Subject: Re: Re: LoPresti Boom Beams for RV-10  

  

   

Expect to be ridiculed for even suggesting RV10 builders should consider COSTS for these add-ons...............RV10 builders do not have a budget according to most.      

   

Dean 40449  

Too cold to paint!   	  Quote: 	
		    http://www.matronics.com/Navigator?RV10-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4

      [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum