UVTReith(at)aol.com Guest
|
Posted: Wed Feb 28, 2007 2:54 am Post subject: Spinner Asembly |
|
|
Hi friends,
for the first runs with my monowheel I have bought an used ground adjustable Warp Drive prop - you never know.
The spinner, as a part of that deal was fitted only with the forward spinner bulkhead.
The aft spinner bulkhead was not a part of the supply.
According to the engine manual for the Rotax 914 on page 8-5 the propeller and spinner assembly is shown with two spinner bulkheads.
Do I need it?
"My" spinner was fixed with 9 screws to the forward bulkhead and was in use approx. 150 hours without problems. The pre-owner changed to adjustable prop.
Thanks for some info to this.
Bruno Reith / UVT Reith
XS-mono, smart-Brabus,
[quote][b]
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|