Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

wigwag switch

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
rocketbob(at)gmail.com
Guest
PostPosted: Tue Jan 16, 2007 6:56 pm    Post subject: wigwag switch Reply with quote
For those of you looking to to wire your landing lights through one switch and also have a wigwag position, like the 4TL1-10 shown in Electric Bob's wigwag diagram but not ridiculously expensive and simpler to wire up, I have found a switch that is perfect. It is made by Carling and the part number is 2GP51-73. No distributors seem to carry this switch as an in-stock item, but if someone like Steinair (Stein are you listening) could order/stock it, it would be a simpler and better solution than any of the diagrams in Electric Bob's wigwag diagram. The switch is a DP3T toggle, OFF-ON-ON so you can wire it to be OFF-WIGWAG-ON for both landing lights yet still keep both lights in separate circuits/fuses when they're not "wagging". I have obtained an engineering sample of this switch from Carling and verified that it will do the job.

Regards,
Bob Japundza
RV-6 flying F1 under const.
[quote][b]

- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
billsettle(at)bellsouth.n
Guest
PostPosted: Wed Jan 17, 2007 2:12 am    Post subject: wigwag switch Reply with quote
RocketBob,

Do you have a link to this switch? I tried going to Carling's site but could not pull up that number.

Thanks,
Bill Settle.
Winston-Salem, NC
-8 Wings
Quote:

From: "Bob J." <rocketbob(at)gmail.com>
Date: 2007/01/16 Tue PM 09:54:53 EST
To: rv-list(at)matronics.com
Subject: wigwag switch

For those of you looking to to wire your landing lights through one switch
and also have a wigwag position, like the 4TL1-10 shown in Electric Bob's
wigwag diagram but not ridiculously expensive and simpler to wire up, I have
found a switch that is perfect. It is made by Carling and the part number
is 2GP51-73. No distributors seem to carry this switch as an in-stock item,
but if someone like Steinair (Stein are you listening) could order/stock it,
it would be a simpler and better solution than any of the diagrams in
Electric Bob's wigwag diagram. The switch is a DP3T toggle, OFF-ON-ON so
you can wire it to be OFF-WIGWAG-ON for both landing lights yet still keep
both lights in separate circuits/fuses when they're not "wagging". I have
obtained an engineering sample of this switch from Carling and verified that
it will do the job.

Regards,
Bob Japundza
RV-6 flying F1 under const.




- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
rocketbob(at)gmail.com
Guest
PostPosted: Wed Jan 17, 2007 4:04 am    Post subject: wigwag switch Reply with quote
http://www.carlingtech.com/pdf/s_g.pdf

On 1/17/07, Bill Settle < billsettle(at)bellsouth.net (billsettle(at)bellsouth.net)> wrote:[quote]--> RV-List message posted by: Bill Settle < billsettle(at)bellsouth.net (billsettle(at)bellsouth.net)>

RocketBob,

Do you have a link to this switch? I tried going to Carling's site but could not pull up that number.

Thanks,
Bill Settle.
Winston-Salem, NC
-8 Wings
Quote:

From: "Bob J." <rocketbob(at)gmail.com (rocketbob(at)gmail.com)>
Date: 2007/01/16 Tue PM 09:54:53 EST
To: rv-list(at)matronics.com (rv-list(at)matronics.com)
Subject: wigwag switch

For those of you looking to to wire your landing lights through one switch
and also have a wigwag position, like the 4TL1-10 shown in Electric Bob's
wigwag diagram but not ridiculously expensive and simpler to wire up, I have
found a switch that is perfect. It is made by Carling and the part number
is 2GP51-73. No distributors seem to carry this switch as an in-stock item,
but if someone like Steinair (Stein are you listening) could order/stock it,
it would be a simpler and better solution than any of the diagrams in
Electric Bob's wigwag diagram. The switch is a DP3T toggle, OFF-ON-ON so
you can wire it to be OFF-WIGWAG-ON for both landing lights yet still keep
both lights in separate circuits/fuses when they're not "wagging". I have
obtained an engineering sample of this switch from Carling and verified that


[b]

- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group