Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

a few issues: wing gap seal velcro doesn't want to stick wel

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
jaydub



Joined: 07 Jan 2020
Posts: 74

PostPosted: Sun May 14, 2023 8:26 pm    Post subject: a few issues: wing gap seal velcro doesn't want to stick wel Reply with quote

Two quick items I'm dealing with as I finish a new build:
I painted my plane with glossy paint. I put my velcro on the wings for the gap seal but it doesn't seem to stick very well. I tried a sample of contact cement but that didn't seem to do well either as it seems the glossy paint doesn't have "teeth" to grab into. Any ideas how to deal with that other than making the lexan hard gap seal or sanding down the paint?

My ailerons seem to have a lot of slop. Upon investigation the u-joint has slop (not from the bolt holes but the u-joint itself) and the upper control rod ends seem to have some slop too. Is this common with Kolb Firestars? Is this going to cause a flutter problem? I do have the ailerons counterweighted and balanced but I've never flown nor worked on an any plane with slop like this. It surprised me being a new build and does make me wonder if this is going to create any issues when I get to test fly.

Thanks,
Jay


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
stuart(at)harnerfarm.net
Guest





PostPosted: Mon May 15, 2023 5:34 am    Post subject: a few issues: wing gap seal velcro doesn't want to stick wel Reply with quote

Jay,

Are you using the velcro supplied by the factory?  The stuff that came
with my Firefly was really sticky but didn't get really stuck until it
had quite a lot of pressure applied to it. It had been folded and the
folds didn't want to come out at first but out in the sunshine when it
warmed up a little I rubbed it all over again and it has stuck really well.

How long has your paint had to cure? Don't know if that matters but
something to think about anyway.

Does the universal joint look like the one in the picture? If it does,
and it has any play in it, I would replace it. Same with the rod ends on
the tubes, mine had no perceivable slop when new except between the bolt
and the eye but that was a very small amount.

I don't know how the joint is constructed under the red seal but was
impressed with it and was told it would outlast the plane. The plans
still showed how to make the torque tube joint with bolts but this is a
much better solution. Maybe you got a bad one?

Stuart

On 5/14/23 23:25, Jay Dub wrote:
Quote:


Two quick items I'm dealing with as I finish a new build:
I painted my plane with glossy paint. I put my velcro on the wings for
the gap seal but it doesn't seem to stick very well. I tried a sample
of contact cement but that didn't seem to do well either as it seems
the glossy paint doesn't have "teeth" to grab into. Any ideas how to
deal with that other than making the lexan hard gap seal or sanding
down the paint?

My ailerons seem to have a lot of slop. Upon investigation the u-joint
has slop (not from the bolt holes but the u-joint itself) and the
upper control rod ends seem to have some slop too. Is this common with
Kolb Firestars? Is this going to cause a flutter problem? I do have
the ailerons counterweighted and balanced but I've never flown nor
worked on an any plane with slop like this. It surprised me being a
new build and does make me wonder if this is going to create any
issues when I get to test fly.

Thanks,
Jay




- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



100_7437.JPG
 Description:
 Filesize:  1.77 MB
 Viewed:  1340 Time(s)

100_7437.JPG


Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group