Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

tail fold PVC "thing" dimensions

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
jaydub



Joined: 07 Jan 2020
Posts: 74

PostPosted: Fri May 12, 2023 1:05 pm    Post subject: tail fold PVC "thing" dimensions Reply with quote

I'm not sure what to call the device that holds the hor. stab and elevator up so one can fold the wings back. I'm looking to make one for my Firestar 2.
 
In the plans it shows to make it with ropes and pipes. Does anyone have the dimensions for making one that uses the pipe insulation on the pipes?  I see on the I could measure it all but was wondering if someone had the dimensions handy.
 
Thanks,
Jay


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
lcottrell



Joined: 29 May 2006
Posts: 1490
Location: Jordan Valley, Or

PostPosted: Sat May 13, 2023 5:32 am    Post subject: tail fold PVC "thing" dimensions Reply with quote

The one that I have is 41 inches overall length. It only needs to be
long enough to come down about half of the rudder and keep the
elevator and rudder from slapping around when folded.
Larry

On Fri, May 12, 2023 at 3:06 PM Jay Dub <bearhawk(at)gmx.com> wrote:
Quote:


I'm not sure what to call the device that holds the hor. stab and elevator up so one can fold the wings back. I'm looking to make one for my Firestar 2.

In the plans it shows to make it with ropes and pipes. Does anyone have the dimensions for making one that uses the pipe insulation on the pipes? I see on the I could measure it all but was wondering if someone had the dimensions handy.

Thanks,
Jay




--
The older I get, the less tolerant I am of those who are intolerant of others.

If you forward this email, or any part of it, please remove my email
address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
jaydub



Joined: 07 Jan 2020
Posts: 74

PostPosted: Sun May 14, 2023 8:13 pm    Post subject: tail fold PVC "thing" dimensions Reply with quote

Thanks Larry,
I was able to get some PVC pipe and insulation today and made one. Seems to work fine.
Jay
 
 

Sent: Saturday, May 13, 2023 at 7:32 AM
From: "Larry Cottrell" <lcottrell1020(at)gmail.com>
To: kolb-list(at)matronics.com
Subject: Re: tail fold PVC "thing" dimensions


The one that I have is 41 inches overall length. It only needs to be
long enough to come down about half of the rudder and keep the
elevator and rudder from slapping around when folded.
Larry

On Fri, May 12, 2023 at 3:06 PM Jay Dub <bearhawk(at)gmx.com> wrote:
Quote:


I'm not sure what to call the device that holds the hor. stab and elevator up so one can fold the wings back. I'm looking to make one for my Firestar 2.

In the plans it shows to make it with ropes and pipes. Does anyone have the dimensions for making one that uses the pipe insulation on the pipes? I see on the I could measure it all but was wondering if someone had the dimensions handy.

Thanks,
Jay




--
The older I get, the less tolerant I am of those who are intolerant of others.

If you forward this email, or any part of it, please remove my email
address before sending.

 


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group