Matronics Email Lists :: View topic - October 2022 Zoom Episode 1

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

October 2022 Zoom Episode 1

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rparigoris

Joined: 24 Nov 2009
Posts: 780

Posted: Tue Nov 01, 2022 12:48 pm Post subject: October 2022 Zoom Episode 1

Hi Group



Here's links to October 2022 Zoom Episode 1:

https://1drv.ms/u/s!Ah1S270Nwg9VgfcStRb_aEPfXkfZcw?e=04T9bt



** You don't need PowerPoint loaded on your computer to view

** When viewing PowerPoint, you can click the white box with orange print on the upper right "Present". This will give you full screen. Press ESC to escape Present mode.

** Click Enter to go Forward and Backspace to go Back (you can also use Forward and Back Arrows on Keyboard)

** You can Save PowerPoint to your computer, if you do you will need PowerPoint loaded to view

** There's also a pdf format link, can't view videos though



Ron and Wayne

rparigoris

Joined: 24 Nov 2009
Posts: 780

Posted: Tue Nov 01, 2022 12:50 pm Post subject: Re: October 2022 Zoom Episode 1

Hi Group



For whatever reason, Matronics always cuts off some of the hyper-link when I post links. Just copy the entire link and paste into URL of browser.



Ron

rparigoris

Joined: 24 Nov 2009
Posts: 780

Posted: Fri Jan 06, 2023 1:57 pm Post subject: DECEMBER 20th 2022 Zoom Episode 2

Hi Group



Here's links to DECEMBER 20th 2022 Zoom Episode 2:

https://1drv.ms/u/s!Ah1S270Nwg9Vgfoxg1WiPGpXRG1asg?e=hWHQ3U



** You don't need PowerPoint loaded on your computer to view

** When viewing PowerPoint, you can click the white box with orange print on the upper right "Present". This will give you full screen. Press ESC to escape Present mode.

** Click Enter to go Forward and Backspace to go Back (you can also use Forward and Back Arrows on Keyboard)

** You can Save PowerPoint to your computer, if you do you will need PowerPoint loaded to view

** There's also a pdf format link, can't view videos though



Ron and Wayne



For whatever reason, Matronics always cuts off some of the hyper-link when I post links. Just copy the entire link and paste into URL of browser.

rparigoris

Joined: 24 Nov 2009
Posts: 780

Posted: Thu Jan 12, 2023 2:13 pm Post subject: Re: January 2023 Zoom Episode 3

Hi Group



Here's links to January 2023 Zoom Episode 3 about Europa Doors:

https://1drv.ms/u/s!Ah1S270Nwg9VgfpSU4tJ3diP8N5amQ?e=zOZnnh

There's a number of mini videos, give things some time to load.



** You don't need PowerPoint loaded on your computer to view

** When viewing PowerPoint, you can click the white box with orange print on the upper right "Present". This will give you full screen. Press ESC to escape Present mode.

** Click Enter to go Forward and Backspace to go Back (you can also use Forward and Back Arrows on Keyboard)

** You can Save PowerPoint to your computer, if you do you will need PowerPoint loaded to view

No PDF this Episode because it has Videos. 



Ron and Wayne

rparigoris

Joined: 24 Nov 2009
Posts: 780

Posted: Sat Feb 18, 2023 11:50 am Post subject: February 2023 Zoom Episode 4

Hi Group



Here's links to February 2023 Zoom Episode 4 about Flap: Drive Engagement Mod, Drive Tube Protection and Upstop:

https://1drv.ms/u/s!Ah1S270Nwg9Vgfxo4GyieZqPm54XaQ?e=wZeNkp



For whatever reason, Matronics always cuts off some of the hyper-link when I post links. Just copy the entire link and paste into URL of browser.



** You don't need PowerPoint loaded on your computer to view

** When viewing PowerPoint, you can click the white box with orange print on the upper right "Present". This will give you full screen. Press ESC to escape Present mode.

** Click Enter to go Forward and Backspace to go Back (you can also use Forward and Back Arrows on Keyboard)

** You can Save PowerPoint to your computer, if you do you will need PowerPoint loaded to view



Ron and Wayne

rparigoris

Joined: 24 Nov 2009
Posts: 780

Posted: Wed Mar 15, 2023 10:19 am Post subject: March 2023 Zoom Episode 5: Fuel Sender Operation and Repair

Hi Group



Here's links to March 2023 Zoom Episode 5 about Fuel Sender Operation and Repair:

https://1drv.ms/u/s!Ah1S270Nwg9Vgfx9spnrAw9ZaL5m7w?e=12nuwO



For whatever reason, Matronics always cuts off some of the hyper-link when I post links. Just copy the entire link and paste into URL of browser.



** If buffering occurs when viewing mp4 video, open the settings icon and reduce resolution. The settings icon is a gear with a hole in it located on bottom.



Ron and Wayne

peterz(at)zutrasoft.com
Guest

Posted: Thu Mar 16, 2023 1:54 pm Post subject: October 2022 Zoom Episode 1

Genius. 



Thx for the vid!

PeteZ



 	  Quote: 	
		   On Mar 15, 2023, at 2:26 PM, rparigoris <rparigor(at)hotmail.com> wrote:

 

 

 

 Hi Group

 

 Here's links to March 2023 Zoom Episode 5 about Fuel Sender Operation and Repair:

 https://1drv.ms/u/s!Ah1S270Nwg9Vgfx9spnrAw9ZaL5m7w?e=12nuwO

 

 For whatever reason, Matronics always cuts off some of the hyper-link when I post links. Just copy the entire link and paste into URL of browser.

 

 ** If buffering occurs when viewing mp4 video, open the settings icon and reduce resolution. The settings icon is a gear with a hole in it located on bottom.

 

 Ron and Wayne

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=510418#510418

Monoman

Joined: 01 Nov 2020
Posts: 22

Posted: Sat Mar 18, 2023 7:14 am Post subject: Re: March 2023 Zoom Episode 5: Fuel Sender Operation and Rep

 	  rparigoris wrote: 	
		  Hi Group



Here's links to March 2023 Zoom Episode 5 about Fuel Sender Operation and Repair:

https://1drv.ms/u/s!Ah1S270Nwg9Vgfx9spnrAw9ZaL5m7w?e=12nuwO



For whatever reason, Matronics always cuts off some of the hyper-link when I post links. Just copy the entire link and paste into URL of browser.



** If buffering occurs when viewing mp4 video, open the settings icon and reduce resolution. The settings icon is a gear with a hole in it located on bottom.



Ron and Wayne 	


Just wanted to say how interesting this video was, completely fascinating stuff regarding the Apollo programme. Thanks for posting.

My father mentioned that back in the late 50's they used an English Electric Saturn analogue computer to simulate nuclear reactor fault conditions. It was a hard wired structure that entirely filled two floors of the building they worked from! Changed days.

kingsnjan(at)westnet.com.
Guest

Posted: Sun Mar 19, 2023 6:00 pm Post subject: October 2022 Zoom Episode 1

Ron,



I have only just managed to watch your video on the Apollo / Europa Fuel 

Gauge you kindly shared with us.



Very professionally done mate and interesting to watch so my sincere 

thanks for doing so.



All you have to do now is get that aircraft of yours finished so we can 

hear about your test flying experiences . . . . . get to it!



Best regards



Kingsley in Oz.



In a previous life, I worked on an electronic accounting machine with 

core memory that was exactly the same design as the early ones 

described.  In my case, the cores were very small indeed and I couldn't 

help feeling for the poor people (Mexican women I believe) who hand sewn 

the three wires through all the cores.  It was truly a work of art.



Do not archive.

Area-51

Joined: 03 May 2021
Posts: 372

Posted: Sun Mar 19, 2023 8:06 pm Post subject: Re: October 2022 Zoom Episode 1

Amazing... we should approach Ratheon to finish the job for an Auto Auto Pilot for the Europa 😃

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum