Matronics Email Lists :: View topic - Classic throttle cables

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Classic throttle cables

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

GBWFH2010

Joined: 31 Jul 2011
Posts: 38

Posted: Wed Jul 01, 2020 1:04 am Post subject: Classic throttle cables

I had the misfortune to suffer a throttle cable break last week, fortunately whilst on the ground. 

It would seem that Europa only stock one size of cable which are designed

 for the XS and these are much longer than the original Classic cables. The problem is not the inner as these can be cut, but the outer which is about 

30cm too long. At present my only solution is to use the new inners with the

Old outers, but I just wondered if

 anyone with a Classic has encountered this problem and if so how you resolved the situation.

Dave at Europa is investigating as he was unaware the Classic required shorter cables, but this does not help at the moment!

_________________
Gordon Grant

G-BWFH

ptag.dev(at)talktalk.net
Guest

Posted: Wed Jul 01, 2020 3:07 am Post subject: Classic throttle cables

Hi!  Gordon,

I never understood it possible to have a Europa throttle cable too long?

Mine went through the firewall and took a huge loop( almost to the front of

the cowl before returning back to the carbs for easy and free operation for

alignment to the carbs point of entry.( no clips or tie wraps needed)

Regards

Bob Harrison  EX G-PTAG.



--

peterz(at)zutrasoft.com
Guest

Posted: Wed Jul 01, 2020 4:00 am Post subject: Classic throttle cables

Solid core (yes i did, also on the ground, and the friction did not allow the throttle to go full open)? Or original stranded?



I have reverted to teflon coated stranded inners (bicycle brake cable core), and find it is now very smooth and free.



Cheers,

Pete



 	  Quote: 	
		   On Jul 1, 2020, at 5:12 AM, GBWFH2010 <gaxuk2001(at)gmail.com> wrote:

 

 

 

 I had the misfortune to suffer a throttle cable break last week, fortunately whilst on the ground. 

 It would seem that Europa only stock one size of cable which are designed

 for the XS and these are much longer than the original Classic cables. The problem is not the inner as these can be cut, but the outer which is about 

 30cm too long. At present my only solution is to use the new inners with the

 Old outers, but I just wondered if

 anyone with a Classic has encountered this problem and if so how you resolved the situation.

 Dave at Europa is investigating as he was unaware the Classic required shorter cables, but this does not help at the moment!

 

 --------

 Gordon Grant

 

 G-BWFH

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=497111#497111

GBWFH2010

Joined: 31 Jul 2011
Posts: 38

Posted: Thu Jul 02, 2020 12:13 am Post subject: Re: Classic throttle cables

Thanks Bob. Do you have a picture of your engine compartment showing 

How your cables were routed?



Regards



Gordon

_________________
Gordon Grant

G-BWFH

ptag.dev(at)talktalk.net
Guest

Posted: Thu Jul 02, 2020 3:40 am Post subject: Classic throttle cables

Hi!Gordon,

No I don't have any pics or the plane any longer but I recall the cables

went forward from the standard quadrant box on the XS cockpit module through

the firewall and curved gently upwards to lay on the top of the engine,

forwards and then aligned backwards to the carb connections.  They appeared

ridiculously long but no sharp or forced bends and no ties gave a completely

free movement. Once positioned they stayed throttle set by the friction

clamped on the actual throttle lever. But as you said they need to fail in

full throttle mode.

I also only oiled the actuating ends ......none down the cable length

.....it only makes drag and collects dust. Mine were bicycle multistrand

cables , not the solid single wire type.



Hope this helps.

Regards

Bob Harrison    Ex G-PTAG.



--

GBWFH2010

Joined: 31 Jul 2011
Posts: 38

Posted: Thu Jul 02, 2020 3:49 am Post subject: Re: Classic throttle cables

Thanks Bob, that is really useful.



Regards



Gordon

_________________
Gordon Grant

G-BWFH

wdaniell.longport(at)gmai
Guest

Posted: Thu Jul 02, 2020 5:23 am Post subject: Classic throttle cables

while we're on the topic, what is the recommended cable lubricant for South Florida conditions?

thanks

Will

William Daniell



LONGPORT



+1 786 878 0246

On Thu, Jul 2, 2020 at 7:51 AM GBWFH2010 <gaxuk2001(at)gmail.com (gaxuk2001(at)gmail.com)> wrote:



 	  Quote: 	
		  --> Europa-List message posted by: "GBWFH2010" <gaxuk2001(at)gmail.com (gaxuk2001(at)gmail.com)>

 

 Thanks Bob, that is really useful.

 

 Regards

 

 Gordon

 

 --------

 Gordon Grant

 

 G-BWFH

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=497138#497138

 

 

 

 

 

 

 ===========

 pa-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

John Wighton

Joined: 18 May 2010
Posts: 239

Posted: Thu Jul 02, 2020 10:50 pm Post subject: Re: Classic throttle cables

Factor 40.



Do not archive.

_________________
John Wighton
Europa XS trigear G-IPOD

n7188u

Joined: 15 Nov 2015
Posts: 395

Posted: Sat Jul 25, 2020 4:43 pm Post subject: Re: Classic throttle cables

William,



I always used tri-flow for lubricating hinges and control cables with good results.



In many aircraft the recommendation is not to use lubricants except for silicone based dry sprays to prevent accumulation of dirt (its an AD in the Mooneys) but in fiorida you have to use something that protects metal so i found tri-flow to be a good compromise.



Chris

wdaniell.longport(at)gmai
Guest

Posted: Sun Jul 26, 2020 6:06 am Post subject: Classic throttle cables

Thanks chris



William Daniell

+1 786 878 0246

On Sat, Jul 25, 2020, 20:48 n7188u <chmgarb(at)gmail.com (chmgarb(at)gmail.com)> wrote:



 	  Quote: 	
		  --> Europa-List message posted by: "n7188u" <chmgarb(at)gmail.com (chmgarb(at)gmail.com)>

 

 William,

 

 I always used tri-flow for lubricating hinges and control cables with good results.

 

 In many aircraft the recommendation is not to use lubricants except for silicone based dry sprays to prevent accumulation of dirt (its an AD in the Mooneys) but in fiorida you have to use something that protects metal so i found tri-flow to be a good compromise.

 

 Chris

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=497411#497411

 

 

 

 

 

 

 ===========

 pa-List" rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List

 ===========

  FORUMS -

 eferrer noreferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer noreferrer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

spcialeffects

Joined: 29 Aug 2012
Posts: 305
Location: Kent

Posted: Mon Jul 27, 2020 3:46 am Post subject: Re: Classic throttle cables

Hey Gordon. 

Just cut the new cables to suit! That’s what I did on my classic with XS FWF (both throttle and choke) and have had no trouble at all.



Regards

Frank X

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum