nuckolls.bob(at)aeroelect Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Jun 07, 2020 12:33 pm    Post subject: Physical construction of Z101   engine bus &  battery bus | 
				     | 
			 
			
				
  | 
			 
			
				At 11:41 AM 6/7/2020, you wrote:
   	  | Quote: | 	 		  | Thanks for the replies. I was not aware of the 9" minimum length on fusible links. Is that somewhere in the Connection?  | 	  
   not yet but will be called out on Z101's notes . . . and probably
   as 6" minimum.
 
   	  | Quote: | 	 		  | Are crimped butt connectors adequate for connecting the fusible link to the protected wire? | 	  
   Yes
 
   	  | Quote: | 	 		  | I recently received some of this fusible link wire in both 12 & 14 gauge. Anyone have experience with it? | 	  
   Used on millions of cars for decades. Will be
   testing here on the bench and recording the
   results. Crimped or soldered joints will, I
   trust, prove satisfactory. There is nothing
   magic about the wire . . . it's the insulation
   that makes it special.
 
  
    Bob . . .
 
  |  | - The Matronics AeroElectric-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?AeroElectric-List |  
  |  
 
 
 
 
  | 
			 
		  |