Matronics Email Lists :: View topic - Battery capacity test load

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Battery capacity test load

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Wed May 13, 2020 10:36 am Post subject: Battery capacity test load

At 01:02 PM 5/13/2020, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "blues750" <den_beaulieu(at)yahoo.com>



 Bob, that's pretty clever.  In my case  how "fancy" should I go? For connections to the load from the battery,  I was thinking of simply using two leads of #10 wire with alligator clips on both ends and having an inline fuseholder on one lead with a 15A fuse.  Or...do I fabricate a switched/fused platform, with ring terminals for connections, etc?  User preference?

 	


   What you describe would be fine. You're not

   switching a really big current . . . yeah, there

   will be some 'sparking' when you clip the final

   joint closed but they don't call us electron-herders

   'sparkies' for nothing.



   20 AWG wire would be fine . . . the leads are

   short and the anticipated 13A load is easily

   managed by that size wire. Same with alligator

   clips.



   KISS my friend . . . KISS



 

 

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

blues750

Joined: 06 Jun 2015
Posts: 56

Posted: Wed May 13, 2020 4:42 pm Post subject: Re: Battery capacity test load

Thanks Bob, once I get setup and gather some data, I'll post results.



Dave

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

blues750

Joined: 06 Jun 2015
Posts: 56

Posted: Sat May 30, 2020 5:13 pm Post subject: Re: Battery capacity test load

Finally received my 4 ohm 100W resistors to make up a resistive load for doing my battery capacity checks.  I get 12.8A through the load and plenty of heating of the heat sink (so I added a fan, and a couple of cooling fins) to the heat sink which is a 4"x6" slab of 3/4" aluminum. Will be interesting to find out what the EarthX battery will do for time before disconnecting.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Resistive load.jpg

Description:

Filesize:

634.68 KB

Viewed:

3280 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum