Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

alterntive rotax regulator [was: Re: Re: Is there any reaso

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
rowlandcarson(at)gmail.co
Guest





PostPosted: Mon May 18, 2020 5:56 am    Post subject: alterntive rotax regulator [was: Re: Re: Is there any reaso Reply with quote

On 2020-05-16, at 13:02, Pete <peterz(at)zutrasoft.com> wrote:

Quote:
I looked over the instructions, and looks quite straightforward......i think tho i’ll keep it in my back pocket as plan B in case an AVC1 purchase doesn't pan out (the overall effort due to its pcb and parts lead-times are detractors for me). The over-voltage feature of the AVC1 is also quite tempting Smile


I had a look over the instructions, and downloaded the additional linked documents, mainly as an academic exercise.

The show-stopper for me is that the PCB board design file is apparently created in EAGLE v3 and that cannot be opened by any version of Eagle currently found in the wild (tried v9.6.1 & 5.12.0, both run fine on my Mac but refuse to open the file). Looks like the board was designed on a machine still running DOS!

Does Jim Butcher have a way of opening the file, or is there any way of contacting the author to see if he can translate the file to anything more modern?

My efforts to find a solution through the AutoDesk EAGLE help forum have hit a brick wall.

in friendship

Rowland

| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson(at)gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
cakeykev(at)gmail.com
Guest





PostPosted: Mon May 18, 2020 6:20 am    Post subject: alterntive rotax regulator [was: Re: Re: Is there any reaso Reply with quote

Schicke regulator is brilliant

Kevin Challis
G ODJG
Quote:
On 18 May 2020, at 14:58, Rowland Carson <rowlandcarson(at)gmail.com> wrote:



> On 2020-05-16, at 13:02, Pete <peterz(at)zutrasoft.com> wrote:
>
> I looked over the instructions, and looks quite straightforward......i think tho i’ll keep it in my back pocket as plan B in case an AVC1 purchase doesn't pan out (the overall effort due to its pcb and parts lead-times are detractors for me). The over-voltage feature of the AVC1 is also quite tempting Smile


I had a look over the instructions, and downloaded the additional linked documents, mainly as an academic exercise.

The show-stopper for me is that the PCB board design file is apparently created in EAGLE v3 and that cannot be opened by any version of Eagle currently found in the wild (tried v9.6.1 & 5.12.0, both run fine on my Mac but refuse to open the file). Looks like the board was designed on a machine still running DOS!

Does Jim Butcher have a way of opening the file, or is there any way of contacting the author to see if he can translate the file to anything more modern?

My efforts to find a solution through the AutoDesk EAGLE help forum have hit a brick wall.

in friendship

Rowland

| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson(at)gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson







- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
rparigoris



Joined: 24 Nov 2009
Posts: 780

PostPosted: Mon May 18, 2020 2:44 pm    Post subject: Re: alterntive rotax regulator [was: Re: Re: Is there any r Reply with quote

Hi Group
I purchased a AVC1 regulator from B and C for Rotax 914. It has adjustable voltage set-point and adjustable low voltage warning. It has a very nice heat sink that's coated with conductive Nickel Plating and has provisions for two grounds.

Here's information that was sent to me from them:

B&C now has a Ducati replacement regulator. It’s a plug and play replacement, has OV protection, warning light output with selectable LV setpoint, and adjustable charging voltage. The unit has been tested by Van’s Aircraft and needs no additional cooling. Purchase includes phosphor bronze connectors. Cheaper connectors can get loose and arc. This caused many of the ducati units to fail. B&C is running free shipping now too.

Relevant links:
Bandc.com/avc1install
bandc.com/wp-content/uploads/2020/04/QuickFacts_AVC1_2020.pdf

Nathan


Nathan Bainbridge
B&C Specialty Products, Inc.
123 East 4th Street
Newton, KS 67114
(316) 283-8000
bandc.com

Ron Parigoris


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group