Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Engines-List Digest: 0 Msgs - 04/13/20

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Engines-List
View previous topic :: View next topic  
Author Message
patwilks(at)mindspring.co
Guest





PostPosted: Thu Apr 16, 2020 8:10 pm    Post subject: Engines-List Digest: 0 Msgs - 04/13/20 Reply with quote

TO MATTE DRAILLE:
FROM: PAT WILKS, DYNA-CAM ENGINES

MATTE, WE recovered most of our assets from the crooks who tried to take over the Dyna-Cam Engine Production Startup efforts. We have been led to believe that the need for starting up new production efforts that would bring many new jobs online would have a lot of support from entrepreneurs.

QUESTION: Is there still an active sport aviation interest in the country that might be interested in having an engine like the Dyna-Cam made available? The marine market is alive and well, but not as able to attract potential investors.

Would appreciate your thoughts.

Thanks,

Pat Wilks


--


- The Matronics Engines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Engines-List
Back to top
genie(at)swissmail.org
Guest





PostPosted: Fri Apr 17, 2020 11:51 am    Post subject: Engines-List Digest: 0 Msgs - 04/13/20 Reply with quote

Greetings Pat,

Following your e-mail I checked on the Dyna-Cam Engine on the Internet.
I had never heard of this engine but I had heard once of the principle.
I find the engine fascinating, as it in principle seems to be better
than conventional engines in most ways. The main obstacle in my opinion
is proving its reliability, as this feature is vital in aviation. I
wonder how long the rollers, their bearings and the swash plate can be
expected to last before failure. And whether it would be possible to
make a diesel engine based on this principle reliable. To prove its
reliability many units have to be sold. But to sell in any quantity the
reliability of such engines has to be proved. That is a conundrum.

Conventional piston engines have a track record of a century and a
quarter. As reliability is so critical for aviation and maritime use I
was wondering whether such engines could be sold in large numbers for
automotive, railway or stationary use. Or perhaps for military use. It
is possible that such engines could be used for drones. After logging
enough hours without any breakdowns it may be possible to accept such
engines in the civilian aviation market. As the saying goes, if one can
build a better mousetrap then the whole world will beat a path to one's
door.

Good luck with the Dyna-Cam Engine Production Startup efforts.

Kind regards

George Nielsen

On 17-Apr-20 6:07, Pat Wilks wrote:
[quote]
TO MATTE DRAILLE:
FROM: PAT WILKS, DYNA-CAM ENGINES

MATTE, WE recovered most of our assets from the crooks who tried to take over the Dyna-Cam Engine Production Startup efforts. We have been led to believe that the need for starting up new production efforts that would bring many new jobs online would have a lot of support from entrepreneurs.

QUESTION: Is there still an active sport aviation interest in the country that might be interested in having an engine like the Dyna-Cam made available? The marine market is alive and well, but not as able to attract potential investors.

Would appreciate your thoughts.

Thanks,

Pat Wilks


--


- The Matronics Engines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Engines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Engines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group