Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Revisiting a REALLY handy tool . . .

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Fri Feb 28, 2020 1:26 pm    Post subject: Revisiting a REALLY handy tool . . . Reply with quote

I think I may have talked about this thingy some
years ago and showed a picture of it. It seems the
thingy in the photo is not to be found having
crawled into the darkest corner of some toolbox.

Needed one for a client project this afternoon.
I built a new one and thought it might be good
to share the rest of the story with the List:

When assembling two or more wires with a solder-sleeve
splice, it's at least a three if not four handed
job. There are a number of soldering-aids for the
workbench that will do the trick . . .but if you're
'in the field' under the hood or behind an instrument
panel, the legacy bench-top Third Hands don't
cut it.

This photo array describes fabrication of a sort
of miniature third-hand. It took only a few
minutes to make and contributed greatly to the
success of my endeavors.

https://tinyurl.com/rjsjghg

If this one gets stored at the front of the
toolbox perhaps I can find it next time . . .

Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
ceengland7(at)gmail.com
Guest





PostPosted: Fri Feb 28, 2020 3:11 pm    Post subject: Revisiting a REALLY handy tool . . . Reply with quote

I like. Would it be even more flexible (pardon the pun) if we soldered a 1-2" piece of solid #12 wire between the clips?
Sent from BlueMail
On Feb 28, 2020, at 4:31 PM, "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
Quote:
Quote:
--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com>I think I may have talked about this thingy someyears ago and showed a picture of it. It seems thethingy in the photo is not to be found havingcrawled into the darkest corner of some toolbox.Needed one for a client project this afternoon.I built a new one and thought it might be goodto share the rest of the story with the List:When assembling two or more wires with a solder-sleevesplice, it's at least a three if not four handedjob. There are a number of soldering-aids for theworkbench that will do the trick . . .but if you're'in the field' under the hood or behind an instrumentpanel, the legacy bench-top Third Hands don'tcut it.This photo array describes fabrication of a sortof miniature third-hand. It took only a fewminutes to make and contributed greatly to thesuccess of my endeavors.https://tinyurl.com/rjsjghgIf this one gets stored at the front of thetoolbox perhaps I can find it next time . . . Bohref="http://www.matronics.com/contribution">http://www.matronics/Navigator?AeroElectric-List">http://www.matronics.com/Navigator?AeroElp://www.matronics.com/contribution">http://www.matronics.com/contribution


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
blues750



Joined: 06 Jun 2015
Posts: 56

PostPosted: Mon Mar 23, 2020 6:59 am    Post subject: Re: Revisiting a REALLY handy tool . . . Reply with quote

I wish I had seen this early in my wiring endeavors! Related question to the topic...is there a "best" temperature setting for the heat gun when doing solder sleeve connections? Thanks for posting this Bob - stay healthy!!

Dave


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Mon Mar 23, 2020 7:32 am    Post subject: Revisiting a REALLY handy tool . . . Reply with quote

At 09:59 AM 3/23/2020, you wrote:
Quote:
--> AeroElectric-List message posted by: "blues750" <den_beaulieu(at)yahoo.com>

I wish I had seen this early in my wiring endeavors! Related question to the topic...is there a "best" temperature setting for the heat gun when doing solder sleeve connections? Thanks for posting this Bob - stay healthy!!

Dave

Wide open . . . You'll begin to feel sorry
for the wire and shrink before the solder
flows inside.



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
blues750



Joined: 06 Jun 2015
Posts: 56

PostPosted: Fri Mar 27, 2020 12:09 pm    Post subject: Re: Revisiting a REALLY handy tool . . . Reply with quote

LOL

"...You'll begin to feel sorry
for the wire and shrink..."

Thanks Bob


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group