Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

How to Install Amphenol Connex 122430

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
art(at)zemon.name
Guest





PostPosted: Tue Jan 14, 2020 7:51 pm    Post subject: How to Install Amphenol Connex 122430 Reply with quote

Help!
I bought a 90-degree TNC connector from Aircraft Spruce. It's an Amphenol Connex 122430
https://www.aircraftspruce.com/catalog/elpages/amphenol11-15368.php

and
https://www.amphenolrf.com/122430-10.html

Amphenol's page says that the "contact termination style" is "solder." From the way that the connector is built, it is clear to me that I should solder the center conductor. No problem.
My question: Should I also solder the shield in some way and, if so, how? Or is crimping that sufficient?
We have one afternoon of warm weather tomorrow so I plan to head out to the airport and finish installing my Garmin GPS 175.
Thanks,
    -- Art Z.
--
https://CheerfulCurmudgeon.com/Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
ceengland7(at)gmail.com
Guest





PostPosted: Tue Jan 14, 2020 8:11 pm    Post subject: How to Install Amphenol Connex 122430 Reply with quote

On 1/14/2020 9:44 PM, Art Zemon wrote:

Quote:
Help!


I bought a 90-degree TNC connector from Aircraft Spruce. It's an Amphenol Connex 122430
https://www.aircraftspruce.com/catalog/elpages/amphenol11-15368.php

and
https://www.amphenolrf.com/122430-10.html



Amphenol's page says that the "contact termination style" is "solder." From the way that the connector is built, it is clear to me that I should solder the center conductor. No problem.


My question: Should I also solder the shield in some way and, if so, how? Or is crimping that sufficient?


We have one afternoon of warm weather tomorrow so I plan to head out to the airport and finish installing my Garmin GPS 175.


Thanks,
    -- Art Z.


--
https://CheerfulCurmudgeon.com/ Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19















That style connector expects that the barrel in the left of the pic will be placed over the coax prior to stripping and soldering. The outer insulation and braid shield should be cut back just enough to allow the center conductor to just reach the center pin in the connector. The center insulator should be trimmed just enough to allow the center conductor to reach the center pin. The knurled barrel pointed left in the pic will be inserted between the coax center insulation and shield, and after soldering the center conductor to the center pin, the outer barrel is slid down against the body of the connector and crimped. The ground connection is made between the knurled surface (mentioned earlier) and the shield braid.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
art(at)zemon.name
Guest





PostPosted: Wed Jan 15, 2020 4:32 am    Post subject: How to Install Amphenol Connex 122430 Reply with quote

Thanks, Charlie. I can do that.
    -- Art Z.


On Tue, Jan 14, 2020 at 10:27 PM Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:

Quote:
On 1/14/2020 9:44 PM, Art Zemon wrote:

Quote:
Help!


I bought a 90-degree TNC connector from Aircraft Spruce. It's an Amphenol Connex 122430
https://www.aircraftspruce.com/catalog/elpages/amphenol11-15368.php

and
https://www.amphenolrf.com/122430-10.html



Amphenol's page says that the "contact termination style" is "solder." From the way that the connector is built, it is clear to me that I should solder the center conductor. No problem.


My question: Should I also solder the shield in some way and, if so, how? Or is crimping that sufficient?


We have one afternoon of warm weather tomorrow so I plan to head out to the airport and finish installing my Garmin GPS 175.


Thanks,
    -- Art Z.


--
https://CheerfulCurmudgeon.com/ Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19















That style connector expects that the barrel in the left of the pic will be placed over the coax prior to stripping and soldering. The outer insulation and braid shield should be cut back just enough to allow the center conductor to just reach the center pin in the connector. The center insulator should be trimmed just enough to allow the center conductor to reach the center pin. The knurled barrel pointed left in the pic will be inserted between the coax center insulation and shield, and after soldering the center conductor to the center pin, the outer barrel is slid down against the body of the connector and crimped. The ground connection is made between the knurled surface (mentioned earlier) and the shield braid.




--
https://CheerfulCurmudgeon.com/Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Wed Jan 15, 2020 8:15 am    Post subject: How to Install Amphenol Connex 122430 Reply with quote

At 09:44 PM 1/14/2020, you wrote:
Quote:
Help!

I bought a 90-degree TNC connector from Aircraft Spruce. It's an Amphenol Connex 122430
https://www.aircraftspruce.com/catalog/elpages/amphenol11-15368.php
and
https://www.amphenolrf.com/122430-10.html

Amphenol's page says that the "contact termination style" is "solder." From the way that the connector is built, it is clear to me that I should solder the center conductor. No problem.

Yes, the crimp style, right angle connectors
are unique in that one connection (center conductor)
is soldered.

Quote:
My question: Should I also solder the shield in some way and, if so, how? Or is crimping that sufficient?

The shield is crimped with a process
and tools common to the series.


Quote:
We have one afternoon of warm weather tomorrow so I plan to head out to the airport and finish installing my Garmin GPS 175.

That is a crimped shield. It uses the same tools
as the straight connector. For the .195" coax
cables (RG58/141/142/400/LMR195) you need a crimp
tool with a .213" hex die. Installation of a two-crimp
connector is illustrated here:

https://tinyurl.com/shkj3j4

Optimal stripping dimensions for that connector
are given on the customer data sheet:

https://www.amphenolrf.com/downloads/dl/file/id/1510/product/4284/122430_10_customer_drawing.pdf

Striping is really easy with the right tool:

https://tinyurl.com/j6ghop2

I did a quick look-see on youtube for a good
video on this topic. They range from barely
informative to outright wrong . . . I guess
I need to get into the video business . . .




Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
art(at)zemon.name
Guest





PostPosted: Wed Jan 15, 2020 9:10 am    Post subject: How to Install Amphenol Connex 122430 Reply with quote

Bob,
No worries. I can handle the details of stipping and soldering and crimping. I just wanted confirmation that I only needed to crimp the shield.
Cheers,
    -- Art Z.


On Wed, Jan 15, 2020 at 10:35 AM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:

Quote:
At 09:44 PM 1/14/2020, you wrote:
Quote:
Help!

I bought a 90-degree TNC connector from Aircraft Spruce. It's an Amphenol Connex 122430
https://www.aircraftspruce.com/catalog/elpages/amphenol11-15368.php
and
https://www.amphenolrf.com/122430-10.html

Amphenol's page says that the "contact termination style" is "solder." From the way that the connector is built, it is clear to me that I should solder the center conductor. No problem.

  Yes, the crimp style, right angle connectors
  are unique in that one connection (center conductor)
  is soldered.

Quote:
My question: Should I also solder the shield in some way and, if so, how? Or is crimping that sufficient?

  The shield is crimped with a process
  and tools common to the series.


Quote:
We have one afternoon of warm weather tomorrow so I plan to head out to the airport and finish installing my Garmin GPS 175.

  That is a crimped shield. It uses the same tools
  as the straight connector. For the .195" coax
  cables (RG58/141/142/400/LMR195) you need a crimp
  tool with a .213" hex die. Installation of a two-crimp
  connector is illustrated here:

https://tinyurl.com/shkj3j4

  Optimal stripping dimensions for that connector
  are given on the customer data sheet:

https://www.amphenolrf.com/downloads/dl/file/id/1510/product/4284/122430_10_customer_drawing.pdf

  Striping is really easy with the right tool:

https://tinyurl.com/j6ghop2

  I did a quick look-see on youtube for a good
  video on this topic. They range from barely
  informative to outright wrong . . . I guess
  I need to get into the video business . . .
 



  Bob . . .

--
https://CheerfulCurmudgeon.com/Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Wed Jan 15, 2020 9:46 am    Post subject: How to Install Amphenol Connex 122430 Reply with quote

At 11:07 AM 1/15/2020, you wrote:
Quote:
Bob,

No worries. I can handle the details of stipping and soldering and crimping. I just wanted confirmation that I only needed to crimp the shield.

Cheers,

Good on you my friend . . .



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group