Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

headrest extension

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
freddythek10(at)gmail.com
Guest





PostPosted: Wed Jul 08, 2020 8:54 am    Post subject: headrest extension Reply with quote

Will…yes…here are my sketches and a couple of pixs…assembly tested to 10 G’s…let me know if you would like more info…Best, Fred
Quote:
On Jul 8, 2020, at 5:35 AM, William Daniell <wdaniell.longport(at)gmail.com (wdaniell.longport(at)gmail.com)> wrote:
Fred,
didnt you design a headrest "extension" to raise the shoulder height of the harness? I can find the posts but not the the design/pics on the forum. If it was you would you mind sending me some pics and the design
thanks
Will
William Daniell
LONGPORT

+1 786 878 0246



- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List



DSCN0012.jpeg
 Description:
 Filesize:  395.87 KB
 Viewed:  2545 Time(s)

DSCN0012.jpeg



DSCN0008.jpeg
 Description:
 Filesize:  364.09 KB
 Viewed:  2545 Time(s)

DSCN0008.jpeg



DSCN7388.jpeg
 Description:
 Filesize:  397.72 KB
 Viewed:  2545 Time(s)

DSCN7388.jpeg



Headrest_1.pdf
 Description:

Download
 Filename:  Headrest_1.pdf
 Filesize:  379.77 KB
 Downloaded:  221 Time(s)


Headrest_2.pdf
 Description:

Download
 Filename:  Headrest_2.pdf
 Filesize:  1.03 MB
 Downloaded:  210 Time(s)

Back to top
wdaniell.longport(at)gmai
Guest





PostPosted: Wed Jul 08, 2020 7:25 pm    Post subject: headrest extension Reply with quote

By the way , are you flying yet?

(I almost went tje subaru route but chickened out)
Will

William Daniell
+1 786 878 0246

On Wed, Jul 8, 2020, 13:02 Fred Klein <freddythek10(at)gmail.com (freddythek10(at)gmail.com)> wrote:

Quote:
Will…yes…here are my sketches and a couple of pixs…assembly tested to 10 G’s…let me know if you would like more info…Best, Fred
Quote:
On Jul 8, 2020, at 5:35 AM, William Daniell <wdaniell.longport(at)gmail.com (wdaniell.longport(at)gmail.com)> wrote:

Fred,
didnt you design a headrest "extension" to raise the shoulder height of the harness?  I can find the posts but not the the design/pics on the forum.  If it was you would you mind sending me some pics and the design
thanks
Will
William Daniell

LONGPORT

+1 786 878 0246





- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
wdaniell.longport(at)gmai
Guest





PostPosted: Wed Jul 08, 2020 7:27 pm    Post subject: headrest extension Reply with quote

Sorry

Forgot to say...Thank you!!
Will

William Daniell
+1 786 878 0246

On Wed, Jul 8, 2020, 23:22 William Daniell <wdaniell.longport(at)gmail.com (wdaniell.longport(at)gmail.com)> wrote:

Quote:
By the way , are you flying yet?

(I almost went tje subaru route but chickened out)
Will

William Daniell
+1 786 878 0246

On Wed, Jul 8, 2020, 13:02 Fred Klein <freddythek10(at)gmail.com (freddythek10(at)gmail.com)> wrote:

Quote:
Will…yes…here are my sketches and a couple of pixs…assembly tested to 10 G’s…let me know if you would like more info…Best, Fred
Quote:
On Jul 8, 2020, at 5:35 AM, William Daniell <wdaniell.longport(at)gmail.com (wdaniell.longport(at)gmail.com)> wrote:

Fred,
didnt you design a headrest "extension" to raise the shoulder height of the harness?  I can find the posts but not the the design/pics on the forum.  If it was you would you mind sending me some pics and the design
thanks
Will
William Daniell

LONGPORT

+1 786 878 0246






- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
freddythek10(at)gmail.com
Guest





PostPosted: Wed Jul 08, 2020 7:46 pm    Post subject: headrest extension Reply with quote

Will…I did have my initial flight back on Nov. 1, ’19; however, it was a short one due to engine overheating. I had fallen in love with my tuned exhaust which placed a lengthy serpentine of exhaust pipe under my cowl, and have believed that, even after wrapping all the pipe & muffler w/ heat shield, I was introducing way too much heat under the cowl and was compromising my cooling system.
After a nasty bout with shingles over the winter, I’ve now gone to straight pipes with twin “Swiss Mufflers”…the installation is just now complete. I’m running 50/50 coolant (265 deg. boiling point) and can now get almost 20 min. on the ground before coolant temps reach 210 deg.

At the moment I’m in the midst of retuning the engine, relocating my OAT, and having another go at sealing some gaps around my radiators…feeling a bit frustrated.

Fred
Quote:
On Jul 8, 2020, at 8:22 PM, William Daniell <wdaniell.longport(at)gmail.com (wdaniell.longport(at)gmail.com)> wrote:
By the way , are you flying yet?
(I almost went tje subaru route but chickened out)

WillWilliam Daniell+1 786 878 0246
On Wed, Jul 8, 2020, 13:02 Fred Klein <freddythek10(at)gmail.com (freddythek10(at)gmail.com)> wrote:
Quote:
Will…yes…here are my sketches and a couple of pixs…assembly tested to 10 G’s…let me know if you would like more info…Best, Fred
Quote:
On Jul 8, 2020, at 5:35 AM, William Daniell <wdaniell.longport(at)gmail.com (wdaniell.longport(at)gmail.com)> wrote:
Fred,
didnt you design a headrest "extension" to raise the shoulder height of the harness? I can find the posts but not the the design/pics on the forum. If it was you would you mind sending me some pics and the design
thanks
Will
William Daniell
LONGPORT

+1 786 878 0246








- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group