Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Lasercut Labels For Panel & Interior (With Pics)

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List
View previous topic :: View next topic  
Author Message
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 25203
Location: Livermore CA USA

PostPosted: Thu Jan 22, 2015 6:12 pm    Post subject: Lasercut Labels For Panel & Interior (With Pics) Reply with quote

I spent a day or so on the CAD laying out all the new panel and interior labels for the RV-8 and also the RV-6 while I was at it. Lot's of precision pays off here. I emailed PDF files of the labels to Ms Carita in Livermore, a label making company, and ordered up some labels. I marked in red where I wanted them cut out.

Today, I picked them up and they are pretty amazing! All I have to do is peal them off the backing and apply! They are similar to what I had on the RV-8 v1.0, but it seems that they did a better job than the first company.

Nothing makes an interior more professional than professional looking labels, IMHO. These cost me $25/sheet. Well worth it!!

-
Matt Dralle

RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...

RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode

Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List



2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(1).jpg
 Description:
 Filesize:  192.54 KB
 Viewed:  3695 Time(s)

2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(1).jpg



2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(2).jpg
 Description:
 Filesize:  116.09 KB
 Viewed:  3695 Time(s)

2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(2).jpg



_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 25203
Location: Livermore CA USA

PostPosted: Thu Jan 22, 2015 6:12 pm    Post subject: Lasercut Labels For Panel & Interior (With Pics) Reply with quote

I spent a day or so on the CAD laying out all the new panel and interior labels for the RV-8 and also the RV-6 while I was at it. Lot's of precision pays off here. I emailed PDF files of the labels to Ms Carita in Livermore, a label making company, and ordered up some labels. I marked in red where I wanted them cut out.

Today, I picked them up and they are pretty amazing! All I have to do is peal them off the backing and apply! They are similar to what I had on the RV-8 v1.0, but it seems that they did a better job than the first company.

Nothing makes an interior more professional than professional looking labels, IMHO. These cost me $25/sheet. Well worth it!!

-
Matt Dralle

RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...

RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode

Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List



2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(1).jpg
 Description:
 Filesize:  192.54 KB
 Viewed:  3695 Time(s)

2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(1).jpg



2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(2).jpg
 Description:
 Filesize:  116.09 KB
 Viewed:  3695 Time(s)

2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(2).jpg



_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 25203
Location: Livermore CA USA

PostPosted: Thu Jan 22, 2015 6:12 pm    Post subject: Lasercut Labels For Panel & Interior (With Pics) Reply with quote

I spent a day or so on the CAD laying out all the new panel and interior labels for the RV-8 and also the RV-6 while I was at it. Lot's of precision pays off here. I emailed PDF files of the labels to Ms Carita in Livermore, a label making company, and ordered up some labels. I marked in red where I wanted them cut out.

Today, I picked them up and they are pretty amazing! All I have to do is peal them off the backing and apply! They are similar to what I had on the RV-8 v1.0, but it seems that they did a better job than the first company.

Nothing makes an interior more professional than professional looking labels, IMHO. These cost me $25/sheet. Well worth it!!

-
Matt Dralle

RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...

RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode

Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List



2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(1).jpg
 Description:
 Filesize:  192.54 KB
 Viewed:  3695 Time(s)

2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(1).jpg



2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(2).jpg
 Description:
 Filesize:  116.09 KB
 Viewed:  3695 Time(s)

2015.01.22_-_RV-8_-_Rebuild_-_All_New_Lasercut_Panel_Labels_(2).jpg



_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group