nuckolls.bob(at)aeroelect Guest
|
Posted: Mon Dec 16, 2013 2:06 pm Post subject: Landing light LEDs - questions about Heat Sink and Flasher |
|
|
Quote: |
Wig-Wag/Flasher: I’m planning to have just one landing light (no taxi light) so more than a wig-wag, I really need a flasher of sorts. I’m considering three alternatives right now (I originally thought of the B&C SSF-1 wig-wag but doesn’t work unless two loads are attached):
- $6.99 An automotive flasher such as http://www.ebay.com/itm/1x-3-Pin-CF13-Car-Flasher-Relay-to-Fix-LED-Light-Blink-Flash-/251289748449 which I suspect may be noisy. Does anyone know for sure? Is there an inexpensive way to cure this?
- $45: Kuntzelman wig-wag controller which is capable of flashing one or two LEDs.
- $88: Perihelion wig-wag… I understand this is not noisy, but probably overkill (it apparently can flash two 250W sources, my LED consumes 20W).
|
Consider this one too . . .
http://tinyurl.com/ab9l92l
http://tinyurl.com/bos5p5r
http://tinyurl.com/mkssom4
http://tinyurl.com/cgr42l5
Bob . . . [quote][b]
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|