Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Glowing LED Warning Lights, Too Dark Now

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
MikeEasley(at)aol.com
Guest





PostPosted: Sun Oct 01, 2006 5:06 am    Post subject: Glowing LED Warning Lights, Too Dark Now Reply with quote

My LED voltage warning lights are now too dark to see in daylight after adding the resistors in the drawing.

Smaller resistors?

Deal with the glow?

Ideas?

Thanks in advance,

Mike Easley
Lancair Super ES, 12V
[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckollsr(at)cox.net
Guest





PostPosted: Sun Oct 01, 2006 10:40 am    Post subject: Glowing LED Warning Lights, Too Dark Now Reply with quote

At 09:04 AM 10/1/2006 -0400, you wrote:

Quote:
My LED voltage warning lights are now too dark to see in daylight after
adding the resistors in the drawing.

Smaller resistors?

Deal with the glow?

What kind of LED's are you using? Individual lamps
or something buried in an assembly? Are they fitted with
any kind of built-in resistor? I.e., designed already
to run directly from 12 or 24v?

Adding the pair of 220 ohm resistors as shown in

http://www.aeroelectric.com/Pictures/Schematics/LV_Led.jpg

assumes that your LED is "barefoot", i.e. no additional
resistances other than those shown in the schematic.

If your led has any such series resistances, then eliminate
the series 220 ohm resistor entirely and run only one
220 ohm resistor in parallel with your resistor-led
combination.

Bob . . .

---------------------------------------------------------
< What is so wonderful about scientific truth...is that >
< the authority which determines whether there can be >
< debate or not does not reside in some fraternity of >
< scientists; nor is it divine. The authority rests >
< with experiment. >
< --Lawrence M. Krauss >
---------------------------------------------------------


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group