Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

3 stage switching for lights

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Fri Dec 01, 2023 3:09 pm    Post subject: 3 stage switching for lights Reply with quote
Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Ceengland



Joined: 11 Oct 2020
Posts: 381
Location: MS
PostPosted: Fri Dec 01, 2023 6:07 pm    Post subject: 3 stage switching for lights Reply with quote
On 12/1/2023 5:09 PM, werner schneider wrote:

Quote:
Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net> (glastar(at)gmx.net)

Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner

Apologies for the inevitable question in answer to a question:
Will you be the only person who manipulates the system? Because anything other than 3 controls seems like head-down time for anyone not well schooled in its operation.

Charlie
Virus-free.www.avast.com[url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Charlie
Back to top
View user's profile Send private message
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Sat Dec 02, 2023 4:08 am    Post subject: 3 stage switching for lights Reply with quote
Hello Charlie,

good question to consider, it's in a center overhead console and I guess 90 of the time the switch would be in the center position (dimmer for both), the rear position (light rear only is out of my view for ground operation) the front would be if the rear passengers are asleep.
[img]cid:part1.WgbUp0k8.XoPxwv9x(at)gmx.net[/img]
So I would estimate the switch itself will be operated not to many times. But your question might lead me just to a 4th dimmer for rear only and maybe even positioned so the rear pax can handle it themself.

Thanks for your always very well valued hints and tips Charlie!

Werner

On 02.12.2023 03:11, Charlie England wrote:

Quote:
On 12/1/2023 5:09 PM, werner schneider wrote:

Quote:
Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net>

Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner

Apologies for the inevitable question in answer to a question:
Will you be the only person who manipulates the system? Because anything other than 3 controls seems like head-down time for anyone not well schooled in its operation.

Charlie

Virus-free.www.avast.com [url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


7RB3ywm3bZ2f0JhH.png
 Description:
 Filesize:  19.66 KB
 Viewed:  10779 Time(s)

7RB3ywm3bZ2f0JhH.png
Back to top
View user's profile Send private message
rv8iator



Joined: 11 Apr 2006
Posts: 144
Location: Newberg, OR
PostPosted: Sat Dec 02, 2023 7:01 am    Post subject: 3 stage switching for lights Reply with quote
Many from on-line vendors:https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16

https://www.steinair.com/product/toggle-switch-3-position-dpdt/

https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON

On Fri, Dec 1, 2023 at 3:12 PM werner schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net (glastar(at)gmx.net)>

Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=512721#512721






===========
-
Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========





- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
C. Stone (RV8iator)
Back to top
View user's profile Send private message Send e-mail
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Sat Dec 02, 2023 7:24 am    Post subject: 3 stage switching for lights Reply with quote
Thanks Christopher,

but they do not work as they have not 3 independent position

[img]cid:part1.qand01en.SKawBNOz(at)gmx.net[/img]

it's always a set of 2 closed so eg. if you feed from 5 and 2 you could do 5-4 up, 5-6 middle but then down you would have 2-3 but 5-6 would be closed as well Sad

On 02.12.2023 16:00, Christopher Cee Stone wrote:

Quote:
Many from on-line vendors: https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16



https://www.steinair.com/product/toggle-switch-3-position-dpdt/



https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON







On Fri, Dec 1, 2023 at 3:12 PM werner schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net (glastar(at)gmx.net)>

Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=512721#512721






===========
-
Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========






- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


oxCByHXCMgH1ko1z.png
 Description:
 Filesize:  55.37 KB
 Viewed:  10778 Time(s)

oxCByHXCMgH1ko1z.png
Back to top
View user's profile Send private message
rv8iator



Joined: 11 Apr 2006
Posts: 144
Location: Newberg, OR
PostPosted: Sat Dec 02, 2023 7:32 am    Post subject: 3 stage switching for lights Reply with quote
[img]cid:ii_lpo7ldww1[/img]
Take at the functions. It appears to me this is what you want.

Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB

...chris
On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
Thanks Christopher,

but they do not work as they have not 3 independent position

[img]cid:ii_18c2b25c54dcc363cd1[/img]

it's always a set of 2 closed so eg. if you feed from 5 and 2 you could do 5-4 up, 5-6 middle but then down you would have 2-3 but 5-6 would be closed as well Sad

On 02.12.2023 16:00, Christopher Cee Stone wrote:

Quote:
Many from on-line vendors: https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16



https://www.steinair.com/product/toggle-switch-3-position-dpdt/



https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON







On Fri, Dec 1, 2023 at 3:12 PM werner schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net (glastar(at)gmx.net)>

Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=512721#512721






===========
-
Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========








- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


oxCByHXCMgH1ko1z.png
 Description:
 Filesize:  55.37 KB
 Viewed:  10777 Time(s)

oxCByHXCMgH1ko1z.png
image.png
 Description:
 Filesize:  810.1 KB
 Viewed:  10777 Time(s)

image.png

_________________
C. Stone (RV8iator)
Back to top
View user's profile Send private message Send e-mail
bobkuc(at)gmail.com
Guest
PostPosted: Sat Dec 02, 2023 8:33 am    Post subject: 3 stage switching for lights Reply with quote
I would think that you need a 4 position switch since off position would be needed.  I would just  go with 2 switches, but if you want only one then look at a 4 position rotary switch.    

1 off
2 front
3 back
4 both
On Sat, Dec 2, 2023, 10:37 AM Christopher Cee Stone <rv8iator(at)gmail.com (rv8iator(at)gmail.com)> wrote:

Quote:
[img]cid:ii_lpo7ldww1[/img]
Take at the functions. It appears to me this is what you want.

Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB

...chris
On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
Thanks Christopher,

but they do not work as they have not 3 independent position

[img]cid:ii_18c2b25c54dcc363cd1[/img]

it's always a set of 2 closed so eg. if you feed from 5 and 2 you could do 5-4 up, 5-6 middle but then down you would have 2-3 but 5-6 would be closed as well Sad

On 02.12.2023 16:00, Christopher Cee Stone wrote:

Quote:
Many from on-line vendors: https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16



https://www.steinair.com/product/toggle-switch-3-position-dpdt/



https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON







On Fri, Dec 1, 2023 at 3:12 PM werner schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net (glastar(at)gmx.net)>

Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=512721#512721






===========
-
Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========









- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


oxCByHXCMgH1ko1z.png
 Description:
 Filesize:  55.37 KB
 Viewed:  10773 Time(s)

oxCByHXCMgH1ko1z.png
image.png
 Description:
 Filesize:  810.1 KB
 Viewed:  10773 Time(s)

image.png
Back to top
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Sat Dec 02, 2023 9:16 am    Post subject: 3 stage switching for lights Reply with quote
Christopher, that is the same as below, due to 2 feeds it does not work

Cheers Werner

On 02.12.2023 16:31, Christopher Cee Stone wrote:

Quote:
[img]cid:part1.vZaL24vr.Yd3Ovgoe(at)gmx.net[/img]
Take at the functions. It appears to me this is what you want.



Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB



...chris


On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
Thanks Christopher,

but they do not work as they have not 3 independent position

[img]cid:part2.iTW4m0cB.8H2z0xo3(at)gmx.net[/img]

it's always a set of 2 closed so eg. if you feed from 5 and 2 you could do 5-4 up, 5-6 middle but then down you would have 2-3 but 5-6 would be closed as well Sad

On 02.12.2023 16:00, Christopher Cee Stone wrote:

Quote:
Many from on-line vendors: https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16



https://www.steinair.com/product/toggle-switch-3-position-dpdt/



https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON







On Fri, Dec 1, 2023 at 3:12 PM werner schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:

Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net (glastar(at)gmx.net)>

Hi Folks,

I wonder if I could save on a 4th dimmer Wink Here what I want to achieve:

Cabin lights (LED) 2 section, front and rear:

-position 1, front lights on dimmer, rear lights off
-position 2, front and rear lights on dimmer
-position 3, front lights off, rear lights on 13.8V

I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality.

Thanks for your help (due to space constrains the switch would need to use screw terminals in addition)

Werner




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=512721#512721






===========
-
Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========









- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


image.png
 Description:
 Filesize:  810.1 KB
 Viewed:  10767 Time(s)

image.png
oxCByHXCMgH1ko1z.png
 Description:
 Filesize:  55.37 KB
 Viewed:  10767 Time(s)

oxCByHXCMgH1ko1z.png
Back to top
View user's profile Send private message
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Sat Dec 02, 2023 9:21 am    Post subject: 3 stage switching for lights Reply with quote
Thanks Bob,

The dimmer has the off functionality, so 3 position would work but need
to have 2 feeders, diodes would be against crossfeed here my
architecture, but the switch will not work this way

On 02.12.2023 17:32, Bob Kuc wrote:
[quote] I would think that you need a 4 position switch since off position
would be needed.  I would just  go with 2 switches, but if you want
only one then look at a 4 position rotary switch.

1 off
2 front
3 back
4 both

On Sat, Dec 2, 2023, 10:37 AM Christopher Cee Stone
<rv8iator(at)gmail.com> wrote:

image.png
Take at the functions. It appears to me this is what you want.

Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB
<https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB>

...chris

On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net>
wrote:

Thanks Christopher,

but they do not work as they have not 3 independent position

it's always a set of 2 closed so eg. if you feed from 5 and 2
you could do 5-4 up, 5-6 middle but then down you would have
2-3 but 5-6 would be closed as well Sad

On 02.12.2023 16:00, Christopher Cee Stone wrote:
> Many from on-line vendors:
> https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16
>
> https://www.steinair.com/product/toggle-switch-3-position-dpdt/
>
> https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON
>
> On Fri, Dec 1, 2023 at 3:12 PM werner schneider
> <glastar(at)gmx.net> wrote:
>
>
> schneider" <glastar(at)gmx.net>
>
> Hi Folks,
>
> I wonder if I could save on a 4th dimmer Wink Here what I
> want to achieve:
>
> Cabin lights (LED) 2 section, front and rear:
>
> -position 1, front lights on dimmer, rear lights off
> -position 2, front and rear lights on dimmer
> -position 3, front lights off, rear lights on 13.8V
>
> I did craft a scheme, but I'm not able to find a switch
> which offer that 3 stage functionality or maybe I'm just
> not good enough in wiring it for that functionality.
>
> Thanks for your help (due to space constrains the switch
> would need to use screw terminals in addition)
>
> Werner
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=512721#512721
> ===========
> -
> Electric-List" rel="noreferrer"
> target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
> ===========
> FORUMS -
> eferrer" target="_blank">http://forums.matronics.com
> ===========
> WIKI -
> errer" target="_blank">http://wiki.matronics.com
> ===========
> b Site -
>           -Matt Dralle, List Admin

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
mike_tailwind



Joined: 06 Feb 2017
Posts: 12
PostPosted: Sat Dec 02, 2023 10:51 am    Post subject: 3 stage switching for lights Reply with quote
That looks like it should work.
I'd pull the feed for switch input pin2 from before the dimmer and use one fuse.
I assume there are series resistors as part of the cabin LEDs to limit current? If, not they are needed.
The LM317 dimmer circuit will not go to a completely off state.



On Saturday, December 2, 2023 at 11:37:32 AM CST, Werner Schneider <glastar(at)gmx.net> wrote:




Thanks Bob, The dimmer has the off functionality, so 3 position would work but need to have 2 feeders, diodes would be against crossfeed here my architecture, but the switch will not work this way [img]cid:i45CqlsWaMHW4lY2lZ6w[/img] On 02.12.2023 17:32, Bob Kuc wrote:
Quote:


I would think that you need a 4 position switch since off position would be needed. I would just go with 2 switches, but if you want only one then look at a 4 position rotary switch.
1 off
2 front
3 back
4 both

On Sat, Dec 2, 2023, 10:37 AM Christopher Cee Stone <rv8iator(at)gmail.com (rv8iator(at)gmail.com)> wrote:
Quote:
[img]cid:ryv2KY4sswXRFK5neZYw[/img] Take at the functions. It appears to me this is what you want.

Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB

...chris

On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:
Quote:
Thanks Christopher, but they do not work as they have not 3 independent position [img]cid:k8CSnNfR6RRA4kSMUTx8[/img] it's always a set of 2 closed so eg. if you feed from 5 and 2 you could do 5-4 up, 5-6 middle but then down you would have 2-3 but 5-6 would be closed as well Sad On 02.12.2023 16:00, Christopher Cee Stone wrote:
Quote:
Many from on-line vendors: https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16

https://www.steinair.com/product/toggle-switch-3-position-dpdt/

https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON



On Fri, Dec 1, 2023 at 3:12 PM werner schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:
Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net (glastar(at)gmx.net)> Hi Folks, I wonder if I could save on a 4th dimmer Wink Here what I want to achieve: Cabin lights (LED) 2 section, front and rear: -position 1, front lights on dimmer, rear lights off -position 2, front and rear lights on dimmer -position 3, front lights off, rear lights on 13.8V I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality. Thanks for your help (due to space constrains the switch would need to use screw terminals in addition) Werner Read this topic online here: http://forums.matronics.com/viewtopic.php?p=512721#512721 =========== - Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List =========== FORUMS - eferrer" target="_blank">http://forums.matronics.com =========== WIKI - errer" target="_blank">http://wiki.matronics.com =========== b Site - -Matt Dralle, List Admin. ="noreferrer" target="_blank">https://matronics.com/contribution ===========





- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


elV0N5m0KgFy5740.png
 Description:
 Filesize:  77.38 KB
 Viewed:  10752 Time(s)

elV0N5m0KgFy5740.png
image.png
 Description:
 Filesize:  810.1 KB
 Viewed:  10752 Time(s)

image.png
oxCByHXCMgH1ko1z.png
 Description:
 Filesize:  55.37 KB
 Viewed:  10752 Time(s)

oxCByHXCMgH1ko1z.png
Back to top
View user's profile Send private message
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Sun Dec 03, 2023 1:48 pm    Post subject: 3 stage switching for lights Reply with quote
Thanks M,

the circuit shown for the dimmer is not exactly the product used, the
Perhelion dimer has an integrated on-off switch. And the LED's are
strips with resistors for 12 V.

The problem I see is, in the position where the rear led strip is on
full voltage via pin 2, the front is as well on the dimmer, that is not
what I want. so that position is not independent. I would like to have 3
independent switch position.

Cheers Werner

On 02.12.2023 19:50, M Wilson wrote:
[quote] That looks like it should work.
I'd pull the feed for switch input pin2 from before the dimmer and use
one fuse.
I assume there are series resistors as part of the cabin LEDs to limit
current?  If, not they are needed.

The LM317 dimmer circuit will not go to a completely off state.
On Saturday, December 2, 2023 at 11:37:32 AM CST, Werner Schneider
<glastar(at)gmx.net> wrote:
Thanks Bob,

The dimmer has the off functionality, so 3 position would work but
need to have 2 feeders, diodes would be against crossfeed here my
architecture, but the switch will not work this way

On 02.12.2023 17:32, Bob Kuc wrote:
I would think that you need a 4 position switch since off position
would be needed.  I would just go with 2 switches, but if you want
only one then look at a 4 position rotary switch.

1 off
2 front
3 back
4 both

On Sat, Dec 2, 2023, 10:37 AM Christopher Cee Stone
<rv8iator(at)gmail.com <mailto:rv8iator(at)gmail.com>> wrote:

image.png
Take at the functions. It appears to me this is what you want.

Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB
<https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB>

...chris

On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net
<mailto:glastar(at)gmx.net>> wrote:

Thanks Christopher,

but they do not work as they have not 3 independent position

it's always a set of 2 closed so eg. if you feed from 5 and 2
you could do 5-4 up, 5-6 middle but then down you would have
2-3 but 5-6 would be closed as well Sad

On 02.12.2023 16:00, Christopher Cee Stone wrote:
> Many from on-line vendors:
> https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16
> <https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16>
>
> https://www.steinair.com/product/toggle-switch-3-position-dpdt/
> <https://www.steinair.com/product/toggle-switch-3-position-dpdt/>
>
> https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON
> <https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON>
>
> On Fri, Dec 1, 2023 at 3:12 PM werner schneider
> <glastar(at)gmx.net <mailto:glastar(at)gmx.net>> wrote:
>
>
> schneider" <glastar(at)gmx.net <mailto:glastar(at)gmx.net>>
>
> Hi Folks,
>
> I wonder if I could save on a 4th dimmer Wink Here what I
> want to achieve:
>
> Cabin lights (LED) 2 section, front and rear:
>
> -position 1, front lights on dimmer, rear lights off
> -position 2, front and rear lights on dimmer
> -position 3, front lights off, rear lights on 13.8V
>
> I did craft a scheme, but I'm not able to find a switch
> which offer that 3 stage functionality or maybe I'm just
> not good enough in wiring it for that functionality.
>
> Thanks for your help (due to space constrains the switch
> would need to use screw terminals in addition)
>
> Werner
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=512721#512721
> <http://forums.matronics.com/viewtopic.php?p=512721#512721>
> ===========
> -
> Electric-List" rel="noreferrer"
> target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
> <http://www.matronics.com/Navigator?AeroElectric-List>
> ===========
> FORUMS -
> eferrer" target="_blank">http://forums.matronics.com
> <http://forums.matronics.com>
> ===========
> WIKI -
> errer" target="_blank">http://wiki.matronics.com
> <http://wiki.matronics.com>
> ===========
> b Site -
>           -Matt Dralle, List Admin

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
mike_tailwind



Joined: 06 Feb 2017
Posts: 12
PostPosted: Mon Dec 04, 2023 7:30 am    Post subject: 3 stage switching for lights Reply with quote
It looks like you need a DP3T switch. Do a search for them. It seems that it is a 4PDT switch with a jumper. You can search for those also.
The selection seems to be limited. There are several with PC pins and some expensive ones with screw terminals.
I've never used one. They have 12 terminals on the back of the switch, but you don't need any diodes.
See the last page on the attached; it shows the jumper wiring.



On Sunday, December 3, 2023 at 03:58:08 PM CST, Werner Schneider <glastar(at)gmx.net> wrote:




Thanks M, the circuit shown for the dimmer is not exactly the product used, the Perhelion dimer has an integrated on-off switch. And the LED's are strips with resistors for 12 V. The problem I see is, in the position where the rear led strip is on full voltage via pin 2, the front is as well on the dimmer, that is not what I want. so that position is not independent. I would like to have 3 independent switch position. Cheers Werner On 02.12.2023 19:50, M Wilson wrote:
Quote:


That looks like it should work.
I'd pull the feed for switch input pin2 from before the dimmer and use one fuse.
I assume there are series resistors as part of the cabin LEDs to limit current? If, not they are needed.

The LM317 dimmer circuit will not go to a completely off state.



On Saturday, December 2, 2023 at 11:37:32 AM CST, Werner Schneider <glastar(at)gmx.net> (glastar(at)gmx.net) wrote:


Thanks Bob, The dimmer has the off functionality, so 3 position would work but need to have 2 feeders, diodes would be against crossfeed here my architecture, but the switch will not work this way [img][/img] On 02.12.2023 17:32, Bob Kuc wrote:
Quote:


I would think that you need a 4 position switch since off position would be needed. I would just  go with 2 switches, but if you want only one then look at a 4 position rotary switch.
1 off
2 front
3 back
4 both

On Sat, Dec 2, 2023, 10:37 AM Christopher Cee Stone <rv8iator(at)gmail.com (rv8iator(at)gmail.com)> wrote:
Quote:
[img][/img] Take at the functions. It appears to me this is what you want.

Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB

...chris

On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:
Quote:
Thanks Christopher, but they do not work as they have not 3 independent position [img][/img] it's always a set of 2 closed so eg. if you feed from 5 and 2 you could do 5-4 up, 5-6 middle but then down you would have 2-3 but 5-6 would be closed as well Sad On 02.12.2023 16:00, Christopher Cee Stone wrote:
Quote:
Many from on-line vendors: https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16

https://www.steinair.com/product/toggle-switch-3-position-dpdt/

https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON



On Fri, Dec 1, 2023 at 3:12 PM werner schneider <glastar(at)gmx.net (glastar(at)gmx.net)> wrote:
Quote:
--> AeroElectric-List message posted by: "werner schneider" <glastar(at)gmx.net (glastar(at)gmx.net)> Hi Folks, I wonder if I could save on a 4th dimmer Wink Here what I want to achieve: Cabin lights (LED) 2 section, front and rear: -position 1, front lights on dimmer, rear lights off -position 2, front and rear lights on dimmer -position 3, front lights off, rear lights on 13.8V I did craft a scheme, but I'm not able to find a switch which offer that 3 stage functionality or maybe I'm just not good enough in wiring it for that functionality. Thanks for your help (due to space constrains the switch would need to use screw terminals in addition) Werner Read this topic online here: http://forums.matronics.com/viewtopic.php?p=512721#512721 =========== - Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List =========== FORUMS - eferrer" target="_blank">http://forums.matronics.com =========== WIKI - errer" target="_blank">http://wiki.matronics.com =========== b Site - -Matt Dralle, List Admin. ="noreferrer" target="_blank">https://matronics.com/contribution ===========





- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


ck_techdata.pdf
 Description:

Download
 Filename:  ck_techdata.pdf
 Filesize:  503.7 KB
 Downloaded:  222 Time(s)
Back to top
View user's profile Send private message
nuckolls.bob(at)aeroelect
Guest
PostPosted: Mon Dec 04, 2023 9:33 am    Post subject: 3 stage switching for lights Reply with quote
At 09:29 AM 12/4/2023, you wrote:
Quote:
It looks like you need a DP3T switch. Do a search for them. It seems that it is a 4PDT switch with a jumper. You can search for those also.
The selection seems to be limited. There are several with PC pins and some expensive ones with screw terminals.
I've never used one. They have 12 terminals on the back of the switch, but you don't need any diodes.
See the last page on the attached; it shows the jumper wiring.

This may be an option:

This switch has a 'standard' bat-handle and
mounts in the legacy 15/32 hole but has
miniature works on the back. It has enough
poles of specialty operations to get the
functionality you describe.

Not nearly so pricey as it's full-size
cousins.

https://tinyurl.com/ylf6k7gc

https://tinyurl.com/64y4ar53








Bob . . .

////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================

In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List


2CH_lighting_controller.jpg
 Description:
 Filesize:  128.95 KB
 Viewed:  10685 Time(s)

2CH_lighting_controller.jpg
Back to top
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Mon Dec 04, 2023 2:17 pm    Post subject: 3 stage switching for lights Reply with quote
Thanks Bob,

with the 5A rating that switch has enough "OOMPS" and will perfectly fit my needs Smile))

appreciated!

Werner

On 04.12.2023 18:32, Robert L. Nuckolls, III wrote:

Quote:
At 09:29 AM 12/4/2023, you wrote:
Quote:
It looks like you need a DP3T switch.  Do a search for them.  It seems that it is a 4PDT switch with a jumper. You can search for those also. 
The selection seems to be limited.  There are several with PC pins and some expensive ones with screw terminals.
I've never used one.  They have 12 terminals on the back of the switch, but you don't need any diodes.
See the last page on the attached; it shows the jumper wiring.

   This may be an option:

   This switch has a 'standard' bat-handle and
   mounts in the legacy 15/32 hole but has
   miniature works on the back. It has enough
   poles of specialty operations to get the
   functionality you describe.

   Not nearly so pricey as it's full-size
   cousins.

https://tinyurl.com/ylf6k7gc

https://tinyurl.com/64y4ar53








  Bob . . .

                   ////
                  (o o)
   ===========o00o=(_)=o00o=========
   < Go ahead, make my day . . .   >
   < show me where I'm wrong.      >
   =================================
 
   In the interest of creative evolution
   of the-best-we-know-how-to-do based
   on physics and good practice.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
ChuckGauthier(at)comcast.
Guest
PostPosted: Tue Dec 05, 2023 6:44 am    Post subject: 3 stage switching for lights Reply with quote
Hello Mike,

I have found the following information very helpful in designing unusual toggle switch wiring configurations, which seems to be your case.

Go to Bob's AeroElectric Connection book, Page EX11-2.
Or, use this link on the B&C website: AeroElectric Connection - "Switch Ratings, What's It All Mean?":

https://bandc.com/wp-content/uploads/2018/05/aec_switch_ratings.pdf

There are the pole diagrams for the different toggle switch configurations available through B&C.

One of these might work for you.

Good Luck,

Chuck

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Tue Dec 05, 2023 7:07 am    Post subject: 3 stage switching for lights Reply with quote
Thanks Chuck,

I did that beforehand, however it needs some bridging of some contacts
to achieve what I need, Bob's link did provide that information.

Cheers Werner

On 05.12.2023 15:43, Chuck wrote:
[quote]
Hello Mike,

I have found the following information very helpful in designing
unusual toggle switch wiring configurations, which seems to be your case

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
werner schneider



Joined: 24 May 2021
Posts: 57
PostPosted: Tue Dec 05, 2023 1:14 pm    Post subject: 3 stage switching for lights Reply with quote
Thanks M,

that is it, sorry got that mail in the spam folder lost before seen now.

Cheers Werner

On 04.12.2023 16:29, M Wilson wrote:
[quote] It looks like you need a DP3T switch.  Do a search for them.  It seems
that it is a 4PDT switch with a jumper. You can search for those also.
The selection seems to be limited.  There are several with PC pins and
some expensive ones with screw terminals.
I've never used one.  They have 12 terminals on the back of the
switch, but you don't need any diodes.
See the last page on the attached; it shows the jumper wiring.
On Sunday, December 3, 2023 at 03:58:08 PM CST, Werner Schneider
<glastar(at)gmx.net> wrote:
Thanks M,

the circuit shown for the dimmer is not exactly the product used, the
Perhelion dimer has an integrated on-off switch. And the LED's are
strips with resistors for 12 V.

The problem I see is, in the position where the rear led strip is on
full voltage via pin 2, the front is as well on the dimmer, that is
not what I want. so that position is not independent. I would like to
have 3 independent switch position.

Cheers Werner

On 02.12.2023 19:50, M Wilson wrote:
That looks like it should work.
I'd pull the feed for switch input pin2 from before the dimmer and use
one fuse.
I assume there are series resistors as part of the cabin LEDs to limit
current?  If, not they are needed.

The LM317 dimmer circuit will not go to a completely off state.
On Saturday, December 2, 2023 at 11:37:32 AM CST, Werner Schneider
<glastar(at)gmx.net> <mailto:glastar(at)gmx.net> wrote:
Thanks Bob,

The dimmer has the off functionality, so 3 position would work but
need to have 2 feeders, diodes would be against crossfeed here my
architecture, but the switch will not work this way

On 02.12.2023 17:32, Bob Kuc wrote:
I would think that you need a 4 position switch since off position
would be needed.  I would just  go with 2 switches, but if you want
only one then look at a 4 position rotary switch.

1 off
2 front
3 back
4 both

On Sat, Dec 2, 2023, 10:37 AM Christopher Cee Stone
<rv8iator(at)gmail.com <mailto:rv8iator(at)gmail.com>> wrote:

image.png
Take at the functions. It appears to me this is what you want.

Also
https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB
<https://www.ebay.com/itm/293559818578?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=293559818578&targetid=1490630670660&device=c&mktype=pla&googleloc=9032917&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1490630670660&abcId=9307249&merchantid=114784040&gclid=Cj0KCQiAyKurBhD5ARIsALamXaHdlww9Fe9Yu1ydQyAe6anUXRiGz4KA3n6oG3-clEaFpkyQR-CLpzUaAsIYEALw_wcB>

...chris

On Sat, Dec 2, 2023 at 7:26 AM Werner Schneider <glastar(at)gmx.net
<mailto:glastar(at)gmx.net>> wrote:

Thanks Christopher,

but they do not work as they have not 3 independent position

it's always a set of 2 closed so eg. if you feed from 5 and 2
you could do 5-4 up, 5-6 middle but then down you would have
2-3 but 5-6 would be closed as well Sad

On 02.12.2023 16:00, Christopher Cee Stone wrote:
> Many from on-line vendors:
> https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16
> <https://www.amazon.com/GAMA-Electronics-Toggle-Switch-Position/dp/B001PNMC16>
>
> https://www.steinair.com/product/toggle-switch-3-position-dpdt/
> <https://www.steinair.com/product/toggle-switch-3-position-dpdt/>
>
> https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON
> <https://bandc.com/product/toggle-switch-double-pole/?attribute_configuration=-10+ON-ON-ON>
>
> On Fri, Dec 1, 2023 at 3:12 PM werner schneider
> <glastar(at)gmx.net <mailto:glastar(at)gmx.net>> wrote:
>
>
> schneider" <glastar(at)gmx.net <mailto:glastar(at)gmx.net>>
>
> Hi Folks,
>
> I wonder if I could save on a 4th dimmer Wink Here what I
> want to achieve:
>
> Cabin lights (LED) 2 section, front and rear:
>
> -position 1, front lights on dimmer, rear lights off
> -position 2, front and rear lights on dimmer
> -position 3, front lights off, rear lights on 13.8V
>
> I did craft a scheme, but I'm not able to find a switch
> which offer that 3 stage functionality or maybe I'm just
> not good enough in wiring it for that functionality.
>
> Thanks for your help (due to space constrains the switch
> would need to use screw terminals in addition)
>
> Werner
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=512721#512721
> <http://forums.matronics.com/viewtopic.php?p=512721#512721>
> ===========
> -
> Electric-List" rel="noreferrer"
> target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
> <http://www.matronics.com/Navigator?AeroElectric-List>
> ===========
> FORUMS -
> eferrer" target="_blank">http://forums.matronics.com
> <http://forums.matronics.com>
> ===========
> WIKI -
> errer" target="_blank">http://wiki.matronics.com
> <http://wiki.matronics.com>
> ===========
> b Site -
>           -Matt Dralle, List Admin

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group