Matronics Email Lists :: View topic - Modification on the fairing Wheels

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Modification on the fairing Wheels

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

Olivier.hequet@neuf.fr

Joined: 21 Aug 2017
Posts: 40
Location: France

Posted: Tue May 30, 2023 3:38 am Post subject: Modification on the fairing Wheels

Hello



How do you inflate your tires on your europa? Do you have a solution to avoid to remove the wheel fairings ? I want to make a little hole but it seems it will be difficult to screw or unscrew the valve cap.



Many thanks for your tips or pictures.



Olivier

F-PAKV 564

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Burrilla

Joined: 25 Apr 2015
Posts: 182

Posted: Tue May 30, 2023 4:13 am Post subject: Modification on the fairing Wheels

I have 5-6cm square hinged flaps cut into the sides of the fairings, secured with a single screw into a captive nut.



There is just enough room to get you fingers through the hole after you rotate the wheel so the valve lines up.



If you have the valve caps which have the six sided flats then you can use a small socket to undo/do up but not too tight.



I then have an extension tube which I screw on to the valve to allow me to connect a standard hand pump of electric pump to inflate.



I tend to carry a bicycle pump, which is lightweight, in the aircraft for topping up on trips when needed.



Alan



 	  Quote: 	
		   On 30 May 2023, at 12:38, Olivier.hequet(at)neuf.fr wrote:

 

 

 

 Hello

 

 How do you inflate your tires on your europa? Do you have a solution to avoid to remove the wheel fairings ? I want to make a little hole but it seems it will be difficult to screw or unscrew the valve cap.

 

 Many thanks for your tips or pictures.

 

 Olivier

 F-PAKV 564

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=510876#510876

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Olivier.hequet@neuf.fr

Joined: 21 Aug 2017
Posts: 40
Location: France

Posted: Tue May 30, 2023 7:14 am Post subject: Re: Modification on the fairing Wheels

Thank you Alan for this precision.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum