Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Canopy ball stud

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
JonathanMilbank



Joined: 14 Apr 2012
Posts: 383
Location: Aberdeen area

PostPosted: Sat Apr 01, 2023 1:33 am    Post subject: Canopy ball stud Reply with quote

Does anyone know the dimensions of the canopy ball studs, please? What is the thread and the diameter of the ball ? Here are links to suppliers:

https://www.ebay.co.uk/itm/112402496613?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cIQwD279Q8a&sssrc=2349624&ssuid=dW2b1pNUSLS&var=&widget_ver=artemis&media=COPY

https://www.sgs-engineering.com/gas-struts/end-fixings/ball-extensions

I've fitted new gas struts which are proving sticky / jerky when opening the canopies a little, then become smoother when the canopy opens wider. A threaded end has broken off one ball stud and I'm loathe to unscrew another in order to make measurement of the thread.

Hopefully the gas struts will become smoother in operation with the passage of time.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Area-51



Joined: 03 May 2021
Posts: 371

PostPosted: Sat Apr 01, 2023 10:42 pm    Post subject: Re: Canopy ball stud Reply with quote

Most gas struts will have a C strap clip at each end (some have a wire spring clip); extend the strut all the way and remove the clip; the socket will come away from the ball.

Give the shaft a light coating of silicone grease to affect smooth op.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
rparigoris



Joined: 24 Nov 2009
Posts: 780

PostPosted: Sun Apr 02, 2023 5:19 pm    Post subject: Re: Canopy ball stud Reply with quote

Hi Jonathan
Ends up I have a spare ball stud and just measured it for you.
A little difficult, I measured across threads and got .186". A 10-32 die wouldn't go on by hand.I tried a 5 x .8mm tap into the nut and it wouldn't go in?
OK got it figured. The threads are 10-32. They plated after they ran a die on them. I ran die on threads and just a tad of plating came off.

So:
** The threads are 10-32
** The length of threaded portion is .390" with a rounded tip
** There is a shoulder on the .390" which is .194" diameter and ~.062" long which isn't threaded
** Where you grab with a wrench (circle with 2 flats) has the circle diameter at .312" and the flats .270" (7 mm)
** The ball is .314" in diameter

Hope that helps
Ron P.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group