Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

TAS Calculations

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> KIS-List
View previous topic :: View next topic  
Author Message
GalinHdz



Joined: 08 Nov 2017
Posts: 147

PostPosted: Sat Oct 16, 2021 4:02 pm    Post subject: TAS Calculations Reply with quote

If you have an EFIS that displays TAS and want to check how accurate it is, let me know. As long as you have ADS-B OUT and fly a standard route I can provide what your TAS actually is.

The procedure is:
Fly at a constant altitude (like 4,500ft) at a constant power setting (like 65%) at three different GPS headings (like 360, 120, 240) in smooth air conditions.
The actual power setting is not important. Keeping it constant and not changing it during the entire flight is important. The actual altitude used is not important. Keeping it constant and not changing it during the entire flight is important. The actual GPS headings are not important but keeping it constant and not changing it once you are established is important. Make sure they are at least 90degrees from each other, 120degrees is best. Each leg needs to be  flown for at least 5 minutes after you are established. Using a GPS driven autopilot for the heading results in the most accurate heading data.
You can also just fly the procedure on your own, jot down the three GPS Ground Speeds and GPS Headings. Then you can either send them to me for calculation or use the attached EXCEL spreadsheet.
Many years ago when I did mine my EFIS and all it's calculations were off by a lot. Once I figured out I had a problem, the fix was easy. Besides, I get bored just flying around. 


- The Matronics KIS-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List



TRUE_AIRSPEED_CALC.xls
 Description:

Download
 Filename:  TRUE_AIRSPEED_CALC.xls
 Filesize:  45.5 KB
 Downloaded:  156 Time(s)

Back to top
View user's profile Send private message
dadmeyers1951(at)gmail.co
Guest





PostPosted: Sat Oct 16, 2021 6:02 pm    Post subject: TAS Calculations Reply with quote

Neat capability!

On Sat, Oct 16, 2021, 7:03 PM Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:

Quote:
If you have an EFIS that displays TAS and want to check how accurate it is, let me know. As long as you have ADS-B OUT and fly a standard route I can provide what your TAS actually is.

The procedure is:
Fly at a constant altitude (like 4,500ft) at a constant power setting (like 65%) at three different GPS headings (like 360, 120, 240) in smooth air conditions.
The actual power setting is not important. Keeping it constant and not changing it during the entire flight is important. The actual altitude used is not important. Keeping it constant and not changing it during the entire flight is important. The actual GPS headings are not important but keeping it constant and not changing it once you are established is important. Make sure they are at least 90degrees from each other, 120degrees is best. Each leg needs to be  flown for at least 5 minutes after you are established. Using a GPS driven autopilot for the heading results in the most accurate heading data.
You can also just fly the procedure on your own, jot down the three GPS Ground Speeds and GPS Headings. Then you can either send them to me for calculation or use the attached EXCEL spreadsheet.
Many years ago when I did mine my EFIS and all it's calculations were off by a lot. Once I figured out I had a problem, the fix was easy. Besides, I get bored just flying around. 


- The Matronics KIS-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List
Back to top
GalinHdz



Joined: 08 Nov 2017
Posts: 147

PostPosted: Sun Oct 17, 2021 7:52 am    Post subject: TAS Calculations Reply with quote

I forgot to add, make sure you write down what your EFIS TAS display was during the flight procedure. Otherwise you have nothing to compare with.

On Saturday, October 16, 2021, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
Quote:
If you have an EFIS that displays TAS and want to check how accurate it is, let me know. As long as you have ADS-B OUT and fly a standard route I can provide what your TAS actually is.

The procedure is:
Fly at a constant altitude (like 4,500ft) at a constant power setting (like 65%) at three different GPS headings (like 360, 120, 240) in smooth air conditions.
The actual power setting is not important. Keeping it constant and not changing it during the entire flight is important. The actual altitude used is not important. Keeping it constant and not changing it during the entire flight is important. The actual GPS headings are not important but keeping it constant and not changing it once you are established is important. Make sure they are at least 90degrees from each other, 120degrees is best. Each leg needs to be  flown for at least 5 minutes after you are established. Using a GPS driven autopilot for the heading results in the most accurate heading data.
You can also just fly the procedure on your own, jot down the three GPS Ground Speeds and GPS Headings. Then you can either send them to me for calculation or use the attached EXCEL spreadsheet.
Many years ago when I did mine my EFIS and all it's calculations were off by a lot. Once I figured out I had a problem, the fix was easy. Besides, I get bored just flying around. 


- The Matronics KIS-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> KIS-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group