Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

OIL PRESSURE

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> M14PEngines-List
View previous topic :: View next topic  
Author Message
Snazpappy



Joined: 01 Jan 2019
Posts: 30

PostPosted: Sun Jan 24, 2021 12:15 pm    Post subject: OIL PRESSURE Reply with quote

My oil pressure in the front cockpit shows good pressure, but in flight the indication is constantly erratic and the needle jumps around (plus and minus 20 psi from normal pressure) I had a passenger the other day and asked her to take a quick video of the panel in the back cockpit, when I checked out the video the oil pressure was constant but indicating only about 31 PSI?

Where are the sending units located? I am guessing there are two sending units? Also how can I test which one is indicating the proper pressure? I have a YAK 52TW.

Thanks

Todd


- The Matronics M14PEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?M14PEngines-List
Back to top
View user's profile Send private message
dsavarese0812(at)bellsout
Guest





PostPosted: Sun Jan 24, 2021 6:40 pm    Post subject: OIL PRESSURE Reply with quote

Follow the oil pressure line from the oil pump to the firewall. It should go to the firewall under the center of the oil tank where there is a U shaped fitting. The “legs” of the U go to 2 fittings on the firewall. Now guess what’s on the other side of the firewall? Yep! You guessed it. 2 oil pressure senders.

Given the fact you have a TW and the instruments and senders are UMA, you may just want to call UMA and ask them what the normal output should be from the senders. Test them IAW UMA’s instructions and go from there.
Dennis

Sent from my iPhone

Quote:
On Jan 24, 2021, at 3:17 PM, Snazpappy <snazman1(at)hotmail.com> wrote:



My oil pressure in the front cockpit shows good pressure, but in flight the indication is constantly erratic and the needle jumps around (plus and minus 20 psi from normal pressure) I had a passenger the other day and asked her to take a quick video of the panel in the back cockpit, when I checked out the video the oil pressure was constant but indicating only about 31 PSI?

Where are the sending units located? I am guessing there are two sending units? Also how can I test which one is indicating the proper pressure? I have a YAK 52TW.

Thanks

Todd




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=500412#500412











- The Matronics M14PEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?M14PEngines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> M14PEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group