Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Conventional tailwheel prop clearance

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
albertakolbmk3



Joined: 13 Jun 2009
Posts: 69
Location: Innisfail, AB

PostPosted: Tue Dec 29, 2020 6:36 am    Post subject: Conventional tailwheel prop clearance Reply with quote

Hi,
For the conventional tailwheel operators, did you gain any prop clearance from the monowheel setup?
Regards,
Tony


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Tony B.

Kolb MKIII C
Rotax 582
C Gearbox 3.00:1
WD 66" 3 Blade Prop
Back to top
View user's profile Send private message
Duncan McFadyean



Joined: 18 Jan 2011
Posts: 218

PostPosted: Tue Dec 29, 2020 7:56 am    Post subject: Conventional tailwheel prop clearance Reply with quote

Some did, some didn't.
The Swiss gearleg gives a lot more clearance than the mono. But some of those fitted were cut down (!) to provide the same ride height as the mono.


Duncan McF.
Quote:
On 29 December 2020 at 14:35 Tony Braun <albertaflyer(at)gmail.com> wrote:

Hi,
For the conventional tailwheel operators, did you gain any prop clearance from the monowheel setup?
Regards,
Tony




- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
DuaneFamly(at)aol.com
Guest





PostPosted: Tue Dec 29, 2020 11:31 am    Post subject: Conventional tailwheel prop clearance Reply with quote

Tony, prop clearance depends on both which prop was installed and which conventional gear was installed.
Mike Duane N377EA
Chandler, AZ

Sent from my iPhone

Quote:
On Dec 29, 2020, at 7:36 AM, Tony Braun <albertaflyer(at)gmail.com> wrote:


Hi,
For the conventional tailwheel operators, did you gain any prop clearance from the monowheel setup?
Regards,
Tony


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group