Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Epoxy Resin

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
albertakolbmk3



Joined: 13 Jun 2009
Posts: 69
Location: Innisfail, AB

PostPosted: Mon Dec 28, 2020 6:58 am    Post subject: Epoxy Resin Reply with quote

Hello,
Is it critical to use the same epoxy as used when originally manufactured? I need to fill some holes and bond some pieces? After searching the internet I don't think it does, but just wanted to confirm here. I searched locally, but nobody carries it. Aircraft Spruce doesn't show it either.

Thanks,
Tony


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Tony B.

Kolb MKIII C
Rotax 582
C Gearbox 3.00:1
WD 66" 3 Blade Prop
Back to top
View user's profile Send private message
peterz(at)zutrasoft.com
Guest





PostPosted: Mon Dec 28, 2020 7:07 am    Post subject: Epoxy Resin Reply with quote

Aeropoxy avail at ACS is the NA factory kit epoxy.

Cheers,
Pete
C-GNPZ

Quote:
On Dec 28, 2020, at 10:04 AM, Tony Braun <albertaflyer(at)gmail.com> wrote:


Hello,
Is it critical to use the same epoxy as used when originally manufactured? I need to fill some holes and bond some pieces? After searching the internet I don't think it does, but just wanted to confirm here. I searched locally, but nobody carries it. Aircraft Spruce doesn't show it either.
Thanks,
Tony


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
SteveIvell(at)pestproof.c
Guest





PostPosted: Mon Dec 28, 2020 2:18 pm    Post subject: Epoxy Resin Reply with quote

If it's not structural then I doubt it will be a problem if you use a similar 2 pack epoxy equivalent.



Steve


From: owner-europa-list-server(at)matronics.com <owner-europa-list-server(at)matronics.com> on behalf of Tony Braun <albertaflyer(at)gmail.com>
Sent: Monday, December 28, 2020 2:57:19 PM
To: europa-list(at)matronics.com <europa-list(at)matronics.com>
Subject: Epoxy Resin

Hello,
Is it critical to use the same epoxy as used when originally manufactured? I need to fill some holes and bond some pieces? After searching the internet I don't think it does, but just wanted to confirm here. I searched locally, but nobody carries it. Aircraft Spruce doesn't show it either.

Thanks,
Tony


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
graemeh



Joined: 15 Jun 2017
Posts: 17

PostPosted: Mon Dec 28, 2020 3:07 pm    Post subject: Epoxy Resin Reply with quote

I was told by Europa that I could use West 105 resin with either the fast or slow hardener by Europa tech support.

On Tue, 29 Dec 2020, 11:23 Steve Ivell, <SteveIvell(at)pestproof.co.uk (SteveIvell(at)pestproof.co.uk)> wrote:

Quote:
If it's not structural then I doubt it will be a problem if you use a similar 2 pack epoxy equivalent.



Steve


From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) <owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)> on behalf of Tony Braun <albertaflyer(at)gmail.com (albertaflyer(at)gmail.com)>
Sent: Monday, December 28, 2020 2:57:19 PM
To: europa-list(at)matronics.com (europa-list(at)matronics.com) <europa-list(at)matronics.com (europa-list(at)matronics.com)>
Subject: Epoxy Resin  

Hello,
Is it critical to use the same epoxy as used when originally manufactured? I need to fill some holes and bond some pieces? After searching the internet I don't think it does, but just wanted to confirm here. I searched locally, but nobody carries it. Aircraft Spruce doesn't show it either.

Thanks,
Tony






- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message Send e-mail
peterz(at)zutrasoft.com
Guest





PostPosted: Mon Dec 28, 2020 3:35 pm    Post subject: Epoxy Resin Reply with quote

In north america its aeropoxy from aircraft spruce:
https://www.aircraftspruce.com/catalog/cmpages/aeropoxy.php

Quote:
On Dec 28, 2020, at 6:17 PM, Graeme Hart <graeme.hart(at)onecoolkat.com> wrote:

I was told by Europa that I could use West 105 resin with either the fast or slow hardener by Europa tech support.

On Tue, 29 Dec 2020, 11:23 Steve Ivell, <SteveIvell(at)pestproof.co.uk (SteveIvell(at)pestproof.co.uk)> wrote:

Quote:
If it's not structural then I doubt it will be a problem if you use a similar 2 pack epoxy equivalent.



Steve


From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) <owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)> on behalf of Tony Braun <albertaflyer(at)gmail.com (albertaflyer(at)gmail.com)>
Sent: Monday, December 28, 2020 2:57:19 PM
To: europa-list(at)matronics.com (europa-list(at)matronics.com) <europa-list(at)matronics.com (europa-list(at)matronics.com)>
Subject: Epoxy Resin

Hello,
Is it critical to use the same epoxy as used when originally manufactured? I need to fill some holes and bond some pieces? After searching the internet I don't think it does, but just wanted to confirm here. I searched locally, but nobody carries it. Aircraft Spruce doesn't show it either.

Thanks,
Tony








- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
graemeh



Joined: 15 Jun 2017
Posts: 17

PostPosted: Mon Dec 28, 2020 4:01 pm    Post subject: Epoxy Resin Reply with quote

I should have mentioned mine is a North American kit

On Tue, 29 Dec 2020, 12:40 Pete, <peterz(at)zutrasoft.com (peterz(at)zutrasoft.com)> wrote:

Quote:
In north america its aeropoxy from aircraft spruce:
https://www.aircraftspruce.com/catalog/cmpages/aeropoxy.php

Quote:
On Dec 28, 2020, at 6:17 PM, Graeme Hart <graeme.hart(at)onecoolkat.com (graeme.hart(at)onecoolkat.com)> wrote:

I was told by Europa that I could use West 105 resin with either the fast or slow hardener by Europa tech support.

On Tue, 29 Dec 2020, 11:23 Steve Ivell, <SteveIvell(at)pestproof.co.uk (SteveIvell(at)pestproof.co.uk)> wrote:

Quote:
If it's not structural then I doubt it will be a problem if you use a similar 2 pack epoxy equivalent.



Steve


From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) <owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)> on behalf of Tony Braun <albertaflyer(at)gmail.com (albertaflyer(at)gmail.com)>
Sent: Monday, December 28, 2020 2:57:19 PM
To: europa-list(at)matronics.com (europa-list(at)matronics.com) <europa-list(at)matronics.com (europa-list(at)matronics.com)>
Subject: Epoxy Resin  

Hello,
Is it critical to use the same epoxy as used when originally manufactured? I need to fill some holes and bond some pieces? After searching the internet I don't think it does, but just wanted to confirm here. I searched locally, but nobody carries it. Aircraft Spruce doesn't show it either.

Thanks,
Tony









- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group