Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Swagelok

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
jay-dub



Joined: 31 May 2014
Posts: 99
Location: UK

PostPosted: Sat Oct 31, 2020 3:24 pm    Post subject: Swagelok Reply with quote

Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.

Also, the snot valves.

Thanks from Lockdown, UK. Rolling Eyes


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
CJ owner
Back to top
View user's profile Send private message
pennington.construction.i
Guest





PostPosted: Sat Oct 31, 2020 3:44 pm    Post subject: Swagelok Reply with quote

Jay
I use the all stainless steel valves the Doug supplies. 
The photo is from a Yak list post from before.  
I hung onto it in the event I couldn’t get a Chinese stainless valve.  This is the valve for the main and emergency valves. 
Mark
N621CJ
[img]cid:175810a6162a44d93281[/img]
[img]cid:175810a6bcd40077f272[/img]

On Sat, Oct 31, 2020 at 7:31 PM jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:

Quote:
--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>

Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.

Also, the snot valves.

Thanks from Lockdown, UK.  [Rolling Eyes]

--------
CJ and Yak-52 owner




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=499045#499045






===========
List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Yak-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========





- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



IMG_4521.jpg
 Description:
 Filesize:  373.14 KB
 Viewed:  4045 Time(s)

IMG_4521.jpg



IMG_4522.jpg
 Description:
 Filesize:  285.26 KB
 Viewed:  4045 Time(s)

IMG_4522.jpg


Back to top
jay-dub



Joined: 31 May 2014
Posts: 99
Location: UK

PostPosted: Sat Oct 31, 2020 3:46 pm    Post subject: Re: Swagelok Reply with quote

Perfect, thanks.

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
CJ owner
Back to top
View user's profile Send private message
wamflight(at)gmail.com
Guest





PostPosted: Sat Oct 31, 2020 3:54 pm    Post subject: Swagelok Reply with quote

And the sizes we need to tap the threads?
Quote:
On Nov 1, 2020, at 8:42 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
Jay

I use the all stainless steel valves the Doug supplies.

The photo is from a Yak list post from before.

I hung onto it in the event I couldn’t get a Chinese stainless valve. This is the valve for the main and emergency valves.

Mark
N621CJ

<IMG_4522.jpg>
<IMG_4521.jpg>

On Sat, Oct 31, 2020 at 7:31 PM jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
Quote:
--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves. Also, the snot valves. Thanks from Lockdown, UK. [Rolling Eyes] -------- CJ and Yak-52 owner Read this topic online here: http://forums.matronics.com/viewtopic.php?p=499045#499045 =========== List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Yak-List =========== FORUMS - eferrer" target="_blank">http://forums.matronics.com =========== WIKI - errer" target="_blank">http://wiki.matronics.com =========== b Site - -Matt Dralle, List Admin. rel="noreferrer" target="_blank">http://www.matronics.com/contribution ===========





- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
k7wx



Joined: 24 May 2010
Posts: 117

PostPosted: Sat Oct 31, 2020 3:54 pm    Post subject: Swagelok Reply with quote

Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.

Warren Hill
N464TW
Mesa, AZ
[img]cid:EAE9B400-E834-43EA-9F8E-4560C6ABBEC3(at)Home[/img]
Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.Also, the snot valves.Thanks from Lockdown, UK. [Rolling Eyes]--------CJ and Yak-52 ownerRead this topic online here:http://forums.matronics.com/viewtopic.php?p=499045#499045



- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



Swagelok.jpg
 Description:
 Filesize:  244.06 KB
 Viewed:  4035 Time(s)

Swagelok.jpg


Back to top
View user's profile Send private message Send e-mail
wamflight(at)gmail.com
Guest





PostPosted: Sat Oct 31, 2020 4:02 pm    Post subject: Swagelok Reply with quote

did you tap the new valve? size?
Quote:
On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.

Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.Also, the snot valves.Thanks from Lockdown, UK. [Rolling Eyes]--------CJ and Yak-52 ownerRead this topic online here:http://forums.matronics.com/viewtopic.php?p=499045#499045




- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
hill(at)doctor-hill.com
Guest





PostPosted: Sat Oct 31, 2020 4:10 pm    Post subject: Swagelok Reply with quote

Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
Quote:
On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
Quote:
On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.

Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.Also, the snot valves.Thanks from Lockdown, UK. [Rolling Eyes]--------CJ and Yak-52 ownerRead this topic online here:http://forums.matronics.com/viewtopic.php?p=499045#499045






- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
pennington.construction.i
Guest





PostPosted: Sun Nov 01, 2020 2:27 am    Post subject: Swagelok Reply with quote

Jay
Here is a photo I saved of the snot valve with a swagelock valve.  
At the time the post did not give a part number.  
Maybe someone will recognize the valve and share the part number  
Mark
N621 CJ
[img]cid:1758357376d6cd9bb2a1[/img]

On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:

Quote:
Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread. 


Quote:
On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:

did you tap the new valve? size?
Quote:
On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:

Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ


<Swagelok.jpg>

Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:

--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>

Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.

Also, the snot valves.

Thanks from Lockdown, UK.  [Rolling Eyes]

--------
CJ and Yak-52 owner


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=499045#499045












- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



IMG_4524.jpg
 Description:
 Filesize:  301.16 KB
 Viewed:  4010 Time(s)

IMG_4524.jpg


Back to top
hkgibby(at)yahoo.com
Guest





PostPosted: Sun Nov 01, 2020 5:56 am    Post subject: Swagelok Reply with quote

See RPA Library...click on CJ-6 Nanchang; it’s there.

Sent from my iPhone

Quote:
On Nov 1, 2020, at 2:40 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com> wrote:

Jay
Here is a photo I saved of the snot valve with a swagelock valve.
At the time the post did not give a part number.
Maybe someone will recognize the valve and share the part number
Mark
N621 CJ
<IMG_4524.jpg>


On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:

Quote:
Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.


Quote:
On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:

did you tap the new valve? size?
Quote:
On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:

Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ


<Swagelok.jpg>

Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:

--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>

Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.

Also, the snot valves.

Thanks from Lockdown, UK. [Rolling Eyes]

--------
CJ and Yak-52 owner


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=499045#499045















- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
k7wx



Joined: 24 May 2010
Posts: 117

PostPosted: Sun Nov 01, 2020 7:05 am    Post subject: Swagelok Reply with quote

Hello Mark,
For the Yak-52, it's the Swagelok SS-43GM4-S4.

For the CJ, a typical install requires a right angle adaptor and a different right angle Swagelok valve. If you need this part number I’ll get it later today.

Attached are some images.

Warren
N464TW

[img]cid:509517C5-0E6C-409C-9782-356E707CC9F2[/img] [img]cid:B8602EEA-ACEA-4B48-8640-02C3B6906E5B[/img]
Quote:
On Nov 1, 2020, at 3:26 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
Jay

Here is a photo I saved of the snot valve with a swagelock valve.

At the time the post did not give a part number.

Maybe someone will recognize the valve and share the part number

Mark
N621 CJ

<IMG_4524.jpg>

On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:
Quote:
Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
Quote:
On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
Quote:
On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.

Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.Also, the snot valves.Thanks from Lockdown, UK. [Rolling Eyes]--------CJ and Yak-52 ownerRead this topic online here:http://forums.matronics.com/viewtopic.php?p=499045#499045










- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



w-Yak-52_Snot-Valve.png
 Description:
 Filesize:  357.51 KB
 Viewed:  3995 Time(s)

w-Yak-52_Snot-Valve.png



CJ_Snot_Valve.png
 Description:
 Filesize:  384.2 KB
 Viewed:  3995 Time(s)

CJ_Snot_Valve.png


Back to top
View user's profile Send private message Send e-mail
k7wx



Joined: 24 May 2010
Posts: 117

PostPosted: Sun Nov 01, 2020 8:49 am    Post subject: Swagelok Reply with quote

One additional item. If not already done. The bottom thread of the snot bottle will need to be tapped to accept the input side of the Swagelock valve, which I believe is ¼-inch NPT. After completing the tap, be sure to completely wash out the many small metal fragments produced. It’s helpful to do the tap a little less than you think is needed and then screw int the Swagelock valve until it is tight. If a ¼ to ½ turn more is needed to properly align the value, run the tap just a little more. This way the final valve position will not end up at some odd angle.

- - - - - - - - - -

Hello Mark,
For the Yak-52, it's the Swagelok SS-43GM4-S4.

For the CJ, a typical install requires a right angle adaptor and a different right angle Swagelok valve. If you need this part number I’ll get it later today.

Attached are some images.

Warren
N464TW

[img]cid:509517C5-0E6C-409C-9782-356E707CC9F2[/img] [img]cid:B8602EEA-ACEA-4B48-8640-02C3B6906E5B[/img]
Quote:
On Nov 1, 2020, at 3:26 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
Jay

Here is a photo I saved of the snot valve with a swagelock valve.

At the time the post did not give a part number.

Maybe someone will recognize the valve and share the part number

Mark
N621 CJ

<IMG_4524.jpg>

On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:
Quote:
Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
Quote:
On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
Quote:
On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.

Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.Also, the snot valves.Thanks from Lockdown, UK. [Rolling Eyes]--------CJ and Yak-52 ownerRead this topic online here:http://forums.matronics.com/viewtopic.php?p=499045#499045










- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



w-Yak-52_Snot-Valve.png
 Description:
 Filesize:  357.51 KB
 Viewed:  3989 Time(s)

w-Yak-52_Snot-Valve.png



CJ_Snot_Valve.png
 Description:
 Filesize:  384.2 KB
 Viewed:  3989 Time(s)

CJ_Snot_Valve.png


Back to top
View user's profile Send private message Send e-mail
pennington.construction.i
Guest





PostPosted: Sun Nov 01, 2020 8:58 am    Post subject: Swagelok Reply with quote

Thank you Mr.  Hill
👍👍

On Sun, Nov 1, 2020 at 11:55 AM Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:

Quote:
One additional item. If not already done. The bottom thread of the snot bottle will need to be tapped to accept the input side of the Swagelock valve, which I believe is ¼-inch NPT. After completing the tap, be sure to completely wash out the many small metal fragments produced. It’s helpful to do the tap a little less than you think is needed and then screw int the Swagelock valve until it is tight. If a ¼ to ½ turn more is needed to properly align the value, run the tap just a little more. This way the final valve position will not end up at some odd angle. 
- - - - - - - - - -
Hello Mark,

For the Yak-52, it's the Swagelok SS-43GM4-S4. 
For the CJ, a typical install requires a right angle adaptor and a different right angle Swagelok valve. If you need this part number I’ll get it later today. 
Attached are some images.
Warren
N464TW
[img]cid:17584bd5436ef8af8151[/img]     [img]cid:17584bd54367a877b712[/img]

Quote:
On Nov 1, 2020, at 3:26 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:

Jay
Here is a photo I saved of the snot valve with a swagelock valve.  
At the time the post did not give a part number.  
Maybe someone will recognize the valve and share the part number  
Mark
N621 CJ
<IMG_4524.jpg>

On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:

Quote:
Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread. 


Quote:
On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:

did you tap the new valve? size?
Quote:
On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:

Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ


<Swagelok.jpg>

Quote:
On Oct 31, 2020, at 4:24 PM, jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:

--> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>

Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.

Also, the snot valves.

Thanks from Lockdown, UK.  [Rolling Eyes]

--------
CJ and Yak-52 owner


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=499045#499045


















- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



CJ_Snot_Valve.png
 Description:
 Filesize:  384.2 KB
 Viewed:  3987 Time(s)

CJ_Snot_Valve.png



w-Yak-52_Snot-Valve.png
 Description:
 Filesize:  357.51 KB
 Viewed:  3987 Time(s)

w-Yak-52_Snot-Valve.png


Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group