Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CJ inlet oil temp fault

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
Conga1



Joined: 10 Jan 2020
Posts: 2
Location: New Zealand

PostPosted: Sun Jan 12, 2020 1:57 pm    Post subject: CJ inlet oil temp fault Reply with quote

Hi all, While flying over the weekend I experienced a fault with the inlet oil
temp reading, while in flight the oil temp in both cockpits was reading a
stable 60 degrees, after about half an hour the needle in the front cockpit started flickering erratically, I flicked the selector switch to oil outlet and the needle was at a stable 90 degrees. the temp gauge in the back is fine with
no issues.

So my question is, is there a separate inlet temp probe for each gauge? Is it likely to be a probe fault or maybe a loose wire? Also the location of the oil temp probes?

Your feedback would be appreciated


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
Harv



Joined: 01 Jul 2010
Posts: 170

PostPosted: Wed Jan 15, 2020 5:31 am    Post subject: Re: CJ inlet oil temp fault Reply with quote

From what I recall having had this in bits before the oil temp senders for oil inlet and outlet feed both front and rear cockpits via the change over switch, so if you get good readings in the rear cockpit at all times then I suspect a wiring issue to the front gauge.

Have a look here page 166

http://cj6.com/static/media/files/Technical_Specifications_for_Service__Maintenance.pdf

Good luck


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
Conga1



Joined: 10 Jan 2020
Posts: 2
Location: New Zealand

PostPosted: Wed Jan 15, 2020 6:21 pm    Post subject: Re: CJ inlet oil temp fault Reply with quote

[quote="Harv"]From what I recall having had this in bits before the oil temp senders for oil inlet and outlet feed both front and rear cockpits via the change over switch, so if you get good readings in the rear cockpit at all times then I suspect a wiring issue to the front gauge.

Have a look here page 166

http://cj6.com/static/media/files/Technical_Specifications_for_Service__Maintenance.pdf

Good luck[/quote
great thanks for your feedback, I found a loose plug on one of the inlet temp probes, i am sure this would have been the fault with the intermittent flickering of the gauge, i will find out when i take it for a fly next.


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group