Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

rotax wiring

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith701801-List
View previous topic :: View next topic  
Author Message
ruruny(at)aol.com
Guest





PostPosted: Tue Oct 21, 2008 6:09 pm    Post subject: rotax wiring Reply with quote

Geoff,

Once you crimp the connector on the wire, I added a dab of solder, you can insert it into the connector without taking
it apart. It will snap in place just make sure you have it all ready, it will be hard to take it out. Don't forget to slide the
grommet over the wire first before crimping.

http://701builder.com/rotaxignitionwiring.html

Brian
[quote][b]


- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List
Back to top
Geoff Heap



Joined: 12 Jan 2006
Posts: 266
Location: Lindenwold, New Jersey

PostPosted: Fri Oct 24, 2008 2:54 am    Post subject: Re: rotax wiring Reply with quote

Thanks Brian.
Boy, the list is dead lately. Only concrete answer I've got. No answer on the Rotax list at all.....Geoff


- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List
Back to top
View user's profile Send private message Send e-mail
bobkat



Joined: 07 Sep 2008
Posts: 143
Location: Bismarck, ND

PostPosted: Fri Oct 24, 2008 4:15 am    Post subject: Re: rotax wiring Reply with quote

Geoff's pictures were great and explained it well, Brian. I had just replaced the two plugs on a 912 I have on a Kitfox and wish I'd seen his pictures before ti tackled the job.
My 912 S came already wired and ready to go though. The rest of the rest of the wiring I got right out of the Installation manual and Dynon Instruction book. Pretty straight forward.
Bob


- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List
Back to top
View user's profile Send private message Send e-mail
Geoff Heap



Joined: 12 Jan 2006
Posts: 266
Location: Lindenwold, New Jersey

PostPosted: Fri Oct 24, 2008 4:46 am    Post subject: Re: rotax wiring Reply with quote

I'm Geoff. I had the question. Brian is the Guy with the first class photo's. Give him the credit, not me..............Geoff

Working on the Electrical. Rotax80hp/Dynon D180/Garmin 296/Icom AC-A210/Dual controls/Becker transponder. Electronics Fool


- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List
Back to top
View user's profile Send private message Send e-mail
EricWalker
Guest





PostPosted: Fri Jan 10, 2020 5:35 am    Post subject: Re: rotax wiring Reply with quote

An electronics and all motives of the joyful men’s are struck for the individuals. The aspects of the ‌‌zip job review are vital for the futurisms. The structure is reformed for all joys. Matter is invited for the injunctions. Proportion of the manual script is written for the futurisms. the reign is filled for the automatic means for humans.

- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith701801-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group