Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Oversize aileron/trim tab hinge pin

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
richard.holder(at)outlook
Guest





PostPosted: Sat Sep 07, 2019 7:04 am    Post subject: Oversize aileron/trim tab hinge pin Reply with quote

Hi Dave, I hope all is well in Kent.

I am still atempting to solve my wobbling about problem. I
changed a rod ball end in the ailerons and various other
things to no avail. The outer hinges on the rim tabs have
some wear. Do you have some of the overside pin available
or would you give me the supplier/part number ?

Do you have a supplier for the whole hinge - MS20001-3 or
is it Europa themselves ?

Thanks

Richard Holder


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
graeme bird



Joined: 15 Jul 2010
Posts: 434

PostPosted: Sat Sep 07, 2019 1:05 pm    Post subject: Re: Oversize aileron/trim tab hinge pin Reply with quote

You can get the hinge from Europa, LAS aerospace or aircraft spruce. I doubt the wear would leave a round hole for an oversized pin. Could try a new pin easily though.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Graeme Bird
kit4 (Wagstaff) TBD
Kit3 G-CLXU (Gregory) mono 914 xs Woodcomp
Kit2 G-PATS - (kesterton) Mono Classic 912 warpdrive
Kit 1 G-UMPY - Mono Classic/XS 912S, Woodcomp G(@)gdbmk.co.uk
Back to top
View user's profile Send private message
peterz(at)zutrasoft.com
Guest





PostPosted: Sat Sep 07, 2019 2:36 pm    Post subject: Oversize aileron/trim tab hinge pin Reply with quote

One might consider the “long ez” mod, namely the thinner pin, in a teflon tube/jacket.
Cheers,
Pete

Quote:
On Sep 7, 2019, at 5:05 PM, graeme bird <graeme(at)gdbmk.co.uk> wrote:



You can get the hinge from Europa, LAS aerospace or aircraft spruce. I doubt the wear would leave a round hole for an oversized pin. Could try a new pin easily though.

--------
Graeme Bird
Kit 2 in build, Mono Classic 912;
Kit 1 G-UMPY - Mono Classic/XS FFW 912S, Woodcomp SR3000/3W CS, trutrak Gemini 2 axis AP, PAW, PFLARM, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD on Nexus, Smart A3
380 hours, 980t
g((at))gdbmk.co.uk




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=491223#491223











- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
peterz(at)zutrasoft.com
Guest





PostPosted: Sat Sep 07, 2019 2:39 pm    Post subject: Oversize aileron/trim tab hinge pin Reply with quote

From the archives:
[b]
Quote:
[b]Date: Sat, 13 Dec 1997 10:13:58 -0600 (CST)
From: Steven A Eberhart
Subject: teflon/stainless hinge pin

I am building a wing section for wind tunnel testing in the University of
Illinois low speed wind tunnel. It is 18" chord by 34" span with a 20%
chord aileron. I used standard aluminum piano hinge for the aileron hinge
and was not satisfied with the amount of play in the new piano hinge
(purchased from Wicks Aircraft). After seeing the posts about the
teflon/stainless hinge pin modification I thought I had found the answer
to the play in my hinge. I ordered the teflon tubing and bought a pound
of stainless welding rod. These are the dimensions of the materials:

original hinge pin .084"

stainless welding rod .061"

dia hole in hinge > .091" could only check with piece of brass tubing
as I don't have a set of drills to verify
diameter.

stainless rod with
teflon sleve .091" but would compress to .084"
The stainless rod easily slid into the teflon sleve and the sleve/rod
assembly easily slid into the hinge. There was still slop in the hinge
after inserting the teflon/stainless rod due to the assembly being able
to compress to .084" but it was a smoother operating hinge. It would
seem that the modification would help prevent new hinges from wearing but
I don't know about using it to repair a worn hinge. Would seem that a
thicker wall teflon tubing would be required. I am on the look out for
such teflon tubing. If anyone finds any please let me know.

A 100 ft. of teflon tubing from McMaster-Carr was $14.00 USD and a pound
of welding rod was $14.00 USD.

Steve Eberhart
newtech(at)newtech.com
[/b][/b]

On Sep 7, 2019, at 5:05 PM, graeme bird <graeme(at)gdbmk.co.uk (graeme(at)gdbmk.co.uk)> wrote:
Quote:
--> Europa-List message posted by: "graeme bird" <graeme(at)gdbmk.co.uk (graeme(at)gdbmk.co.uk)>

You can get the hinge from Europa, LAS aerospace or aircraft spruce. I doubt the wear would leave a round hole for an oversized pin. Could try a new pin easily though.

--------
Graeme Bird
Kit 2 in build, Mono Classic 912;
Kit 1 G-UMPY - Mono Classic/XS FFW 912S, Woodcomp SR3000/3W CS, trutrak Gemini 2 axis AP, PAW, PFLARM, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD on Nexus, Smart A3
380 hours, 980t
g((at))gdbmk.co.uk


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=491223#491223

====================================================ref="http://www.matronics.com/Navigator?Europa-List">http://www.matronics.====================================================; - MATRONICS WEB FORUMS -
http://www.matro=================================================




- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Cassel



Joined: 02 Jan 2014
Posts: 21
Location: Norway

PostPosted: Sun Sep 08, 2019 1:01 am    Post subject: Oversize aileron/trim tab hinge pin Reply with quote

Hi
I bought Teflon hinge pin kit designed for Long Ez after some years flying when notice some play (same hinge size as on the Europa)
Address on this page: http://n944x.blogspot.com/2017/05/teflon-hinge-pin-upgrade.html
After 10 years with Teflon/steal no play at all.
Works like a charm.
Regards 
Stephan Cassel
LN-STE

--
MvhStephan


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message AIM Address
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group