Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Airmaster Spinner front bulkhead non adjustable model.

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
budyerly(at)msn.com
Guest





PostPosted: Mon May 06, 2019 7:42 am    Post subject: Airmaster Spinner front bulkhead non adjustable model. Reply with quote

Johnathan,
It sounds as if your front bulkhead is the old style which is not adjustable. That is OK. The best way to make a permanent fix is to clean the inside of the spinner, apply a thin layer of oil or release agent to the spinner, then apply RTV around the cap bulkhead. Push on the spinner and bolt it down and it will make contact and seal up that gap. Remove after cure and trim for a neat finish. Keep in mind that automotive RTV or silicone sealant against aluminum will corrode the aluminum during cure as most contain citrus acid (i.e. that acid taste) so you may consider using a non-acidic or neutral cure type RTV such as Dow737.

Another way which I have never done, is to apply silicone sealant to the motor cap, so the bulkhead is proud of the end cap and push the spinner on and bolt down. I have never done this as the plastic bulkhead still rubs directly on the aluminum causing eventual wear as seen as aluminum dust. RTV is softer and less abrasive under vibration.

Bottom line is if the gap is too large, the spinner screws will eventually wear and that is a fatigue source for an eventual crack in any spinner.

Best Regards,
Bud Yerly

Sent from Mail for Windows 10


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
JonathanMilbank



Joined: 14 Apr 2012
Posts: 384
Location: Aberdeen area

PostPosted: Mon May 06, 2019 3:30 pm    Post subject: Re: Airmaster Spinner front bulkhead non adjustable model. Reply with quote

Thanks Bud,

Excellent advice, as always.

Best wishes,
Jonathan


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group