Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Classic Engine Mount M10 Bolts

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
italianjon



Joined: 05 Aug 2015
Posts: 69

PostPosted: Mon Apr 02, 2018 3:35 am    Post subject: Classic Engine Mount M10 Bolts Reply with quote

Hi All,

On the Classic, the M10 bolts that hold the engine to the engine mounting frame. The M10x55 and M10x130 in the Europa Classic Build Manual... Is there anything special about them, are they standard 'off-the-shelf' DIN912's? 8.8 or 10.9?

It's difficult for me to see the designation markings on mine, and I'd like to have required parts before starting my job.

Best

Jon


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
budyerly(at)msn.com
Guest





PostPosted: Mon Apr 02, 2018 6:00 am    Post subject: Classic Engine Mount M10 Bolts Reply with quote

Jon,
I won’t say for sure on the Classic as the bolts I have for the XS ring mount (similar) appear to be US SAE grade 8 bolts or 10.9 Metric Hardness (+ 830MPa or 120K PSI) which is hardened enough for the task without being too brittle. I would avoid anything lower grade. These bolts are loaded primarily in shear so I worry more about the ring mount wear on the bolt if it is loose. This frame on the Classic and the later XS ring mount must be shimmed tight. See Rotax for a shim kit if you must shim your mount for any reason.

Lockwood Aviation Rotax supplied Allens for the 914 ring mount appear to be this grade also but there are no markings. Torque is 30NM-35NM depending on the year manual you read and are black anodized and have the right hardness...

Regards,
Bud Yerly

Sent from Mail for Windows 10

From: owner-europa-list-server(at)matronics.com <owner-europa-list-server(at)matronics.com> on behalf of italianjon <jon.catilli(at)gmail.com>
Sent: Monday, April 2, 2018 7:35:37 AM
To: europa-list(at)matronics.com
Subject: Classic Engine Mount M10 Bolts


--> Europa-List message posted by: "italianjon" <jon.catilli(at)gmail.com>

Hi All,

On the Classic, the M10 bolts that hold the engine to the engine mounting frame. The M10x55 and M10x130 in the Europa Classic Build Manual... Is there anything special about them, are they standard 'off-the-shelf' DIN912's? 8.8 or 10.9?

It's difficult for me to see the designation markings on mine, and I'd like to have required parts before starting my job.

Best

Jon




Read this topic online here:

https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D478977%23478977&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=IF9iH%2BsC%2Fu3JjsQ%2BwjrfcjTP%2Fcje7lvzitLxcnTamz4%3D&reserved=0






===========
st Email Forum -
ook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=D8jtnxutY0V9zdUAQamSqjir4MVeVeAW14rHxqLATew%3D&reserved=0"> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=D8jtnxutY0V9zdUAQamSqjir4MVeVeAW14rHxqLATew%3D&reserved=0
===========
p; - MATRONICS WEB FORUMS -
ook.com/?url=http%3A%2F%2Fforums.matronics.com&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=SucJ0J1HCd3i9HkSTrTwAmQj0SxRas2GpUINPrCjfBA%3D&reserved=0"> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=SucJ0J1HCd3i9HkSTrTwAmQj0SxRas2GpUINPrCjfBA%3D&reserved=0
===========
p; - NEW MATRONICS LIST WIKI -
ook.com/?url=http%3A%2F%2Fwiki.matronics.com&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=uxSlWc8232Is5J2TLMW4qcAkdgB7G4eyIOJw0iFX0Js%3D&reserved=0"> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwiki.matronics.com&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=uxSlWc8232Is5J2TLMW4qcAkdgB7G4eyIOJw0iFX0Js%3D&reserved=0
===========
p; - List Contribution Web Site -
p;   -Matt Dralle, List Admin.
ook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=DsKSk5R1XhTsqRfnlhDbhRZVdhQn7RpXBZJXTC4jmws%3D&reserved=0"> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&data=02%7C01%7C%7C2ae4368f04a04a18080b08d5988e56b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582659459635912&sdata=DsKSk5R1XhTsqRfnlhDbhRZVdhQn7RpXBZJXTC4jmws%3D&reserved=0
===========


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
italianjon



Joined: 05 Aug 2015
Posts: 69

PostPosted: Mon Apr 02, 2018 6:10 am    Post subject: Re: Classic Engine Mount M10 Bolts Reply with quote

Hi Bud,

Thanks for the reply. I have a suspect oil leak from the starter, and the engine frame is in the way of the removal.

It's a simple, undo, swing the engine forward a little bit, swap the starter and re-fit. No re-shimming should be needed, as I'm not changing anything in the setup.

It shouldn't take too long, to do. I just want the right bolts. I'll order some 10.9's

Best

Jon


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
budyerly(at)msn.com
Guest





PostPosted: Mon Apr 02, 2018 6:22 am    Post subject: Classic Engine Mount M10 Bolts Reply with quote

It shouldn’t, but be prepared. I’ve found a Classic that when the engine frame was unbolted, it sprung out a ¼ of an inch. Plus, oil leaks can be a bugger.
Bud

Sent from Mail for Windows 10

From: owner-europa-list-server(at)matronics.com <owner-europa-list-server(at)matronics.com> on behalf of italianjon <jon.catilli(at)gmail.com>
Sent: Monday, April 2, 2018 10:10:19 AM
To: europa-list(at)matronics.com
Subject: Re: Classic Engine Mount M10 Bolts


--> Europa-List message posted by: "italianjon" <jon.catilli(at)gmail.com>

Hi Bud,

Thanks for the reply. I have a suspect oil leak from the starter, and the engine frame is in the way of the removal.

It's a simple, undo, swing the engine forward a little bit, swap the starter and re-fit. No re-shimming should be needed, as I'm not changing anything in the setup.

It shouldn't take too long, to do. I just want the right bolts. I'll order some 10.9's

Best

Jon




Read this topic online here:

https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D478980%23478980&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=cndWtUUP0Np5X%2BMGrvDy7GlfxtOjwlk1mqnRk1PqL08%3D&reserved=0






===========
st Email Forum -
ook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=AH0LD0QMdMOcoAEnMKc4fjNXumK8EsqcUJeCgjZPIP0%3D&reserved=0"> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=AH0LD0QMdMOcoAEnMKc4fjNXumK8EsqcUJeCgjZPIP0%3D&reserved=0
===========
p; - MATRONICS WEB FORUMS -
ook.com/?url=http%3A%2F%2Fforums.matronics.com&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=dkJ4VE30pri4TtafqmIlwT9RnuTk9KEzWnDeZa46xzc%3D&reserved=0"> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=dkJ4VE30pri4TtafqmIlwT9RnuTk9KEzWnDeZa46xzc%3D&reserved=0
===========
p; - NEW MATRONICS LIST WIKI -
ook.com/?url=http%3A%2F%2Fwiki.matronics.com&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=S5BPF%2BcwaV%2Fagqx8EizjuI8BFPsw6eEywQCHX%2FRgl0c%3D&reserved=0"> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwiki.matronics.com&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=S5BPF%2BcwaV%2Fagqx8EizjuI8BFPsw6eEywQCHX%2FRgl0c%3D&reserved=0
===========
p; - List Contribution Web Site -
p;   -Matt Dralle, List Admin.
ook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=l0oNKRkCWTzjJBxzDo64lhAY3JJw5Kf2dxcTwazQMTs%3D&reserved=0"> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&data=02%7C01%7C%7C322f7b04312a46c0863a08d598a3ee50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636582752195876565&sdata=l0oNKRkCWTzjJBxzDo64lhAY3JJw5Kf2dxcTwazQMTs%3D&reserved=0
===========


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
italianjon



Joined: 05 Aug 2015
Posts: 69

PostPosted: Mon Apr 02, 2018 6:51 am    Post subject: Re: Classic Engine Mount M10 Bolts Reply with quote

Oh joy! Smile

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group