Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Riveting wing nose rib through spar and tail rib on CH-701

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith701801-List
View previous topic :: View next topic  
Author Message
rvsimons



Joined: 18 Jan 2013
Posts: 22

PostPosted: Tue Aug 26, 2014 6:55 am    Post subject: Riveting wing nose rib through spar and tail rib on CH-701 Reply with quote

Doesn't matter on this application. You could alternate them if you wanted. In a case were its not clear I install the rivet the same way I would install a bolt. Head towards the front of the aircraft.
Vance On Aug 25, 2014 10:09 PM, "Perry Delano" <pdelano(at)telus.net (pdelano(at)telus.net)> wrote:[quote]
Hi All,
 
Just started assembling the primered left wing skeleton, and It is a bit late to ask, as the right wing is setting in storage, but does it matter which direction the 4  rivets through the rear rib on the 701 go.  Does one insert the rivet through the nose rib, then spar then rear rib and pull the head on the rear rib side or the other way round or does it matter given the tip rib and rear rib are the same thickness. The spar cap is definetly thicker than the tip rib so the upper and lower rivet direction through the tip rib is defined, but I cannot find  anything definite for the aforementioned 4 rivets.  It is clear from the construction manual which direction the rivets go in the three L angle stiffeners and implied for the spar tip extension. Any help forthcoming will be greatly appreciated.
 
Regards,
 
Perry Delano
Quote:


ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution


[b]


- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

_________________
Vance Simons
Post Falls, Idaho
Zenith 701
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith701801-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group