Matronics Email Lists :: View topic - RV8-List: Settting the correct Spacing (Gap) between VS Top

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

RV8-List: Settting the correct Spacing (Gap) between VS Top

Matronics Email Lists Forum Index -> RV8-List

View previous topic :: View next topic

Author Message

bifft(at)xmission.com
Guest

Posted: Sat May 10, 2008 8:00 am Post subject: RV8-List: Settting the correct Spacing (Gap) between VS Top

On Fri, 9 May 2008, Garey Wittich wrote:



 	  Quote: 	
		   



 Greetings:



 The construction  of my RV8A (RV7 and RV9 are the

 same) the Rudders Top Rib  swings OVER the top Rib of

 the VS.  There is suppose to be a "Gap" between the

 two Ribs so that there is no interference (rubbing of

 them together) as the Rudder is moved.



 My question is  - how do you set this Gap up ???


	




  On mine, I had to file the top of the VS down a bit to get the needed

gap. Given the pre-punched holes, there isn't a lot you can play with,

other than changing how far the rod ends are screwed in, move the top ones

a bit further out than the bottom (keeping them in line of course).

  Brian Huffaker, DSWL (bifft(at)xmission.com)

  RV-8A 80091  riviting fuse.

  1/4 Starduster II N23UT flying

- The Matronics RV8-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV8-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum