Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Deep 7/8" plug socket

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Tim(at)MyRV10.com
Guest





PostPosted: Fri Feb 17, 2006 10:25 am    Post subject: Deep 7/8" plug socket Reply with quote

Anyone have a good source on a nice deeeep 7/8" socket for
pulling sparkplugs? My Champion plugs in my old plane had
the nut higher towards the tip, so my Craftsman worked.
The Unison plugs that came with my stuff have the nut
way down low. My Craftsman socket only just touches
the nut area. I see Aircraft Spruce has a $49 plug
socket. Just thought someone must have one for something
reasonable.

Tim
--
Tim Olson - RV-10 N104CD - Flying
do not archive


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
mike(at)learningplanet.co
Guest





PostPosted: Fri Feb 17, 2006 10:42 am    Post subject: Deep 7/8" plug socket Reply with quote

I just bought one from Avery for $15. It is "new surplus", and is not
chrome plated, but it works.

Regards,
Mike Schipper
-9A N63MS - Flying
www.my9a.com

On Feb 17, 2006, at 12:24 PM, Tim Olson wrote:

Quote:


Anyone have a good source on a nice deeeep 7/8" socket for
pulling sparkplugs? My Champion plugs in my old plane had
the nut higher towards the tip, so my Craftsman worked.
The Unison plugs that came with my stuff have the nut
way down low. My Craftsman socket only just touches
the nut area. I see Aircraft Spruce has a $49 plug
socket. Just thought someone must have one for something
reasonable.

Tim
--
Tim Olson - RV-10 N104CD - Flying
do not archive

www.matronics.com/Navigator?RV10-List



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jim(at)CombsFive.Com
Guest





PostPosted: Fri Feb 17, 2006 5:39 pm    Post subject: Deep 7/8" plug socket Reply with quote

Tim,

I bought a 7/8" 1/2" Dirve, Kobalt socket from Lowes. It's 3-1/4" deep compared to my Craftsman at 2-1/2".

Jim Combs
N312F
40192 - Fuselage

do not archive


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group