Matronics Email Lists

I get one or two each week.

I powered up the trim system the other day and the flap indicator flickered on for just a bit and then went out. How should I go about testing it and the position sensor without screwing something up?

I purchased a wire harness for a Micro air 760 radio (rev. Q). Due to unavailability of Micro air products, I changed to Trig.
Thinking that most of the Micro air harness would be usable, I started t ...

Thank you Bob, with that info. I can make one here.
Once again, you have bailed my butt out.

Hi all, Can some one tell me what positioner I need for the standard D-sub pins for an MH860 crimp tool? Also known as M22520/7-01
Thanks
Dan

Bob,
Yes I am. What is your email?

Hi Folks,
I have two led lights that I want to use for landing lights.
Is there a way to make them work with the B&C flasher assy. to make them wig-wag?

It had been installed for awhile and we don't know if it ever did work.
I removed it from the housing and found that the ground wire was not attached to the panel. I don't know if it be repaired or ...

can anyone tell me why a solar panel that is sealed in it's case, won't output any voltage?

Can someone point me to a simple audio amp that I can use with an MP3 player and plug it into my Microair 760 radio?

Thanks

And the problem with crossing Lake Michigan is???

What lift struts are you guys using on the bubble doors? Source & part no. if you can. CH701
Thanks in advance.

I had the same problem looking for a cowl that would work. Never did find one, so I made my own. I never did get one that looked good.
I also had some issues with the re-drive system. Took the whole ...

Thank you Joe & Bob,
I currently have Z 19 installed. I kind of like your Dwg.
Maybe next year I may change it around. Right now, all I want to do is get it running and fly off 5 hrs.
It's be ...

Joe Gores,
I see that you have been posting on the Viking site some.
Do you see any reason that Bob's Z19 won't work with this engine?
Thanks for any advise.

Bob,
I am using Z19 with some minor changes. It is in a Zenith 701.
After three very interesting flights with another engine set up. I may be on the overly cautious side.
I was just wondering what ...

Could one or two of you expert electron herders look this over and give any advise, pro or con?
http://www.vikingaircraftengines.com/Wiring%20page.html

try this mod. I used it on both the 801 and 701 and it works like a dream.
http://www.skyhawg.com/petals.html
I don't get the nose wheel vib. all that often to have bothered with it.

I received my engine today and it looks great!
Can't wait to get it hung and start the install.
Some parts have been back ordered but I hope that will not be too long.

I received my engine today and it looks great!
Can't wait to get it hung and start the install.
Some parts have been back ordered but I hope that will not be too long.