Matronics Email Lists

The 914 plenum is supported by the compressor transfer pipe and a center stud mount between plenum and ring mount frame.

If you had the stock dimensions you could have them turned up in Delrin perhaps. Just a thought; not sure what material the factory originals are... mine are a bit sloppy and rattle a bit at certain a ...

If the mass balance is contacting one stop and not the other that would indicate something in the control circuit has slipped. If the mass balance is not making contact with either stop then that woul ...

Thats very cool! You created the whole translator board?

What's ridiculous about that?!

Only thing missing is the red "remove before flying" tag...

This week involved a trip to the field where the left hand hatch was opened to grab some recording gear to try out the new gopro; then a trip backhome. Weather has not been great for enjoyable flying. ...

If the FireBoss suffers an engine failure upon filling the pontoon tanks it will sink to the bottom of the lake 😱

Feeling confident; pretty sure I can win this 🤓

Removing the original glass EFIS has turned out to have a down side. Now there is no interior temperature information other than extreme perspiration or a sense of hypothermia. 🙇🏻🤦🏻

Thanks Matt, will have to send a donation for your community suport 😎

Glass EFIS for sale; surplus to needs; no longer required.

"Rare" well used; as new condition; easily portable; fresh AAA batteries just installed.

A terrific upgrade for any aircraft ...

Several possibilities; all treated differently.

The cylinder head sealing contact surface itself could require lapping. Best way to affect this is removal and bench lapping with 240g paper glued on ...

Several possibilities; all treated differently.

The cylinder head sealing contact surface itself could require lapping. Best way to affect this is removal and bench lapping with 240g paper glued on ...

https://i.imgur.com/FKRuoDD.png[/img]

/Kyle[/quote]

Thanks Kyle - Will check the script out; i'm not a natural at code writing but can understand it after a lot of mumblings.

I can't speak hi ...

[quote="spcialeffects"]I see your landing lights. I to made some when mine was a mono[/quote]

They look awesome; looks like fair bit of fine shaping... were you happy with the result?!
...

Nice... its good to be a test pig sometimes; access to special developer features!

I didn't like the TBX anywhere on the europa's rudder. I tried it on the horizontal stab also and didn't like it t ...

Correct, 978mhz Tailbeacon unit marketed in US has option to turn off position light in Wifi Settings gateway and has a transmit power of 25W.

1090mhz TailbeaconX unit is not provided option to tu ...

Thanks... The tailbeacon position light is the transponder's power gateway. Turning off the light also turns off the transponder. Panel mounted switch to the right of the comms radio provides function ...

Wow what an epic journey this one has been. After months of developing solutions and some failures along the way 181 has finally received its planned upgrades, entering a new level of fit for purpose. ...

Hi Tony; planning to fly 181 down coast before christmas. Wanting to know if there is pump gas available at or near to The Oaks field? Might there be any hangar space available at the field to rent fo ...